DBE0640 Datasheet, PDF (3/6 Pages) List of Unclassifed Manufacturers – Variable-Gain Ultra-Wideband Voltage Amplifier

Datasheet
DUPVA-1-60
Variable-Gain
Ultra-Wideband Voltage Amplifier
Absolute Maximum Ratings
Connectors
Signal Input Power
+ 13 dBm (f > 1 kHz)
Signal Input DC Voltage
± 16 V
Signal Output Reverse Power + 20 dBm
Signal Output Reverse DC Voltage + 20 V / - 12 V
Control Input Voltage
+ 16 V / - 5 V
Power Supply Voltage
± 17 V
Input
SMA
Output
SMA
Power Supply
LEMO Series 1S, 3-pin fixed Socket
Pin 1:
+ 15V
Pin 2:
- 15V
Pin 3:
GND
PIN 2
-Vs
PIN 1
+Vs
PIN 3
GND
Control Port
Remote Control Operation
General
Gain Setting -
Corresponding Inputs
Sub-D 25-pin, female, Qual. Class 2
Pin 1:
+12V (Stabilized Power Supply Output)
Pin 2:
-12V (Stabilized Power Supply Output)
Pin 3:
AGND (Analog Ground)
Pin 4:
+5V (Stabilized Power Supply Output)
Pin 5:
Monitor Output
Pin 6 - 8: NC
Pin 9:
DGND (Ground f. Digital Control Pin 10 - 25)
Pin 10 - 13: NC
Pin 14:
Digital Control Input: Gain, LSB
Pin 15:
Digital Control Input: Gain
Pin 16:
Digital Control Input: Gain, MSB
Pin 17 - 25: NC
Remote Control Input Bits are opto-isolated and connected
by logical OR to local switch setting. For remote control
of the gain setting, set the local switch to “Ext.” and
select the wanted gain setting via a 3-bit-code at the
corresponding digital inputs:
Gain
Pin 14 Pin 15 Pin 16

20 dB
Low
Low
Low
30 dB
High
Low
Low
40 dB
Low
High
Low
50 dB
High
High
Low
60 dB
Low
Low
High
SOPHISTICATED TOOLS FOR SIGNAL RECOVERY
Page 3