3030AN Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – 3030 Series M16 [5/8 in] High Output VRS Sensors

0
200
METERS / SECOND
2.5 5.1 7.6 10.1 12.7 15.2 17.8 20.3 22.9 25.4
175
150
125
V P/P
100
75
50
25
0 100 200 300 400 500 600 700 800 900 1000
INCHES / SECOND
5/8
M16*
3030 SERIES
HIGH
OUTPUT
VRS
SENSORS
FOR SPEED SENSING APPLICATIONS WHERE HIGHER OUTPUT VOLTAGES ARE NEEDED.
PERFORMS BEST AT LOW TO MEDIUM SPEEDS WITH MEDIUM TO HIGH IMPEDANCE LOADS.
OPTIMUM ACTUATOR: 20 DP (Module 1.27) Ferrous Metal Gear
TEST CONDITION: A VRS Tech Data
GENERAL SPECIFICATIONS
OUTPUT VOLTAGE: 190V P-P min.
OPER. TEMP. RANGE: -67 to 250F (-55 to 120C)
COIL RESISTANCE: 910 to 1200 OHMS
INDUCTANCE: 450 mH max.
POLE PIECE DIA.: .106" (2.69mm)
GEAR PITCH RANGE: 24 DP (Module 1.06) or Coarser
MIN. SURFACE SPEED: 10 IPS (.25 m/Sec.) Typical MAX. OPER. FREQ.: 15 KHz Typical
VIBRATION: Meets Mil-Std 202F Method 204D
SENSORS WITH 5/8-18 UNF-2A MOUNTING THREAD*,
MS3106 CONNECTOR
MODEL
THREAD LENGTH
WEIGHT
3030AN
1.1" (28 mm)
2.5 oz. (70 gr.)
3030AN25 2.5" (63 mm)
3.0 oz. (84 gr.)
3030AN30 3.0" (76 mm)
3.0 oz. (84 gr.)
3030AN40 4.0" (101 mm)
3.5 oz. (98 gr.)
3030AN50 5.0" (127 mm)
4.5 oz. (128 gr.)
Mates with 41010(VR) Connector or CA210 Cable Assembly
SENSORS WITH 5/8-18 UNF-2A MOUNTING THREAD*,
24" (300 mm) LEADS
MODEL
3030S20
3030S30
THREAD LENGTH
2.0" (50 mm)
3.0” (76 mm)
WEIGHT
2.5 oz. (70 gr.)
3.0 oz. (84 gr.)
SENSORS WITH 5/8-18 UNF-2A MOUNTING THREAD*,
1/2-14 NPT CONDUIT MOUNT, 24" (300 mm) LEADS
MODEL
3030H20
THREAD LENGTH
2.0" (50 mm)
WEIGHT
5.0 oz. (140 gr.)
SENSORS WITH 5/8-18 UNF-2A MOUNTING THREAD*,
MS3106 CONNECTOR, .312" THREAD RELIEF
MODEL
3030A
3030A25
THREAD LENGTH
1.4" (35 mm)
2.5" (63 mm)
WEIGHT
2.5 oz. (70 gr.)
3.0 oz. (84 gr.)
Mates with 41010(VR) Connector or CA210 Cable Assembly
*For M16 x 1.5 6g Mounting Thread Versions, add “M” as the first character of the model number.
Contact Invensys/Electro for availability and pricing.
Invensys Sensor Systems / Electro Corporation, U.S.A.
Tel. [phone]
www.speed-position.invensys.com
Fax [phone]
ISO
9001