|
GDM240128A Datasheet, PDF (27/29 Pages) List of Unclassifed Manufacturers – LCD MODULE | |||
|
◁ |
Item
19) Indication on name plate
(sampling indication label)
Userâs Manual
Criterion for defects
(1) Failure to stamp or label error, or not legible (all acceptable if
legible).
(2) The separation is more than 1/3 for indication discoloration, in
which the characters can be checked.
Defect
type
Minor
7. Reliability
7-1 Lifetime
50,000 hours (25â in the room without ray of sun)
7-2 Items of reliability (See the next page)
Item
1) High
Temperature
Operating
2) Low
Temperature
Operation
3) Humidity
4) High
Temperature
5) Low
Temperature
6) Thermal
shock
7) Vibration
Condition
Criterion
60â 96hrs
-20â 96hrs
No cosmetic failure is allowable.
Contrast ratio should be between initial
value ±10%.
Total current consumption should be below
double of initial value.
40â, 90%RH, 96hrs
70â 96hrs
-30â 96hrs
25ââ30ââ25ââ70â
5(min) 30(min) 5(min) 30(min)
5 cycle, 55~60%RH
10~55~10hz
amplitude: 1.5mm
2hrs for each direction
(X,Y,Z)
No cosmetic failure is allowable.
Contrast ratio should be between initial
value ±20%.
Total current consumption should be below
double of initial value.
No defects in cosmetic and operational
function are allowable.
Total current consumption should be below
double of initial value.
8. Handling precautions
8-1 Mounting method
A panel of LCD module made by Dalian Eastern Display Co., Ltd. consists of
two thin glass plates with polarizers that easily get damaged.
And since the module is constructed and fixed by utilizing fitting holes in the
Printed Circuit Board (PCB), extreme care should be used when handling the
LCD modules.
8-2 Cautions of LCD handling and cleaning
- 26 -
|
▷ |