PICASO-OGM Datasheet, PDF (21/22 Pages) List of Unclassifed Manufacturers – OEM Graphics Module

4D SYSTEMS
17. Specifications and Ratings
PICASO OGM Module
ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature ................................................................................................... -15°C to +65°C
Storage temperature .......................................................................................................................... -30°C +70°C
Voltage on any digital input pin with respect to GND ....................................................................... -0.3V to 6.0V
Voltage on RAW+3.3V with respect to GND ...................................................................................... -0.3V to 3.6V
Voltage on RAW+VCC with respect to GND ...................................................................................... -0.3V to 5.5V
NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at those or any other conditions above those indicated in the
recommended operation listings of this specification is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Parameter
Conditions
Min
Typ
Supply Voltage
(RAW+3.3V)
Backlight Supply
(RAW+VCC)
Stable Regulated external supply
required
3.3
3.3
Stable Regulated external supply
required (3.3V results in dim backlight)
3.3
5.0
Operating Temperature
-10
--
Input Low Voltage (VIL) 3.3V, all pins
0
--
Input High Voltage (VIH) 3.3V, non 5V tolerant pins
0.8
--
Input High Voltage (VIH) All GPIO pins, RX0 and TX0 pins
0.8
--
Reset Pulse
External Open Collector
2.0
--
Operational Delay
Power-Up or External Reset
500
--
Max
3.6
5.5
+60
0.2
3.3
5.5
--
3000
Units
V
V
°C
V
V
V
µs
ms
GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS
Parameter
Supply Current (ICC)
Output Low Voltage
(VOL)
Output High Voltage
(VOH)
Capacitive Loading
Flash Memory
Endurance
Conditions
3.3V, heavily depends on screen usage
conditions, sleep mode
3.3V, IOL = 3.4mA
3.3V, IOL = -2.0mA
All pins
PICASO PmmC Programming
Min
Typ
Max
--
TBD
--
--
--
0.4
2.4
--
--
--
--
50
--
10000
--
Units
mA
V
V
pF
E/W
Order Code: PICASO-OGM
Packaging: Bulk Packaging
ORDERING INFORMATION
© 2013 4D SYSTEMS
Page 21 of 22
www.4dsystems.com.au