ZAX27A Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – MULTI-MODE MAINS MODULE BURST FIRED OR PHASE ANGLE

SPECIFICATIONS
High voltage side
Mains voltage
Supply current
Max. RMS Load current
Load power range
Over temp. shut down
Over temp. reset
Isolation Classification
Max. Cable entry
Dimensions
Overall (Max.)
230V ac 10% @ 50Hz
30mA (max.)
5A (max.).
10W (min.); 1KW (max.)
90ºC
60ºC
Class II
2.5mm²
Low voltage side
Supply voltage
Supply current
Control input range
Inhibit high logic
Inhibit low logic
Supply voltage rejection
Temperature coefficient
Operating temperature
5V
30mA (max.)
0 to 1V or 0 to 5V
>4V
<3V
0.5%/V
0.25%/ºC
0 to +65ºC
21mm (H), excluding leads x 33mm (W) x 33mm (D)
FUSING:
A semiconductor (fast acting) type fuse is supplied as standard for unit protection. On initial switch on some
loads may need an increased Factor of Safety (F of S) for unit and/or device protection. For spares or
replacements contact our sales desk.
CE MARKING
This product family carries a CE marking . These phase angle controllers need a suitable remote filter. For
information see recommendation section and contact our sales desk.
RECOMMENDATIONS AND SAFETY GUIDELINES
Other documents available on request, which may be appropriate for your applications.
CODE
IDENTITY DESCRIPTION
X20008
ZAX27A
Multi-mode mains module Instruction manual
X10229
RFI
Filtering recommendation - addressing EMC Directive
X10213
ITA
Interaction, uses for phase angle and for burst fire control.
X10255
SRA
Safety requirements - addressing the Low Voltage Directive
including :- Thermal data/cooling ; Live parts warning & Earth
requirements; Fusing recommendations.
AP02/4
COS
UAL Conditions of sale
NOTE It is recommended that installation and maintenance of this equipment should be done with
reference to the current edition of the I.E.E. wiring regulations (BS7671) by suitably qualified / trained
personnel. The regulations contain important requirements regarding safety of electrical equipment.
(For International standards refer to I.E.C. directive IEC950).
ORDER CODE: State part number: ZAX27A
UNITED AUTOMATION LIMITED
1Southport Business Park
Kew
Southport, PR8 4HQ
ENGLAND
Page No. 2 of 2
Issue 2
Tel: [phone] Main
Tel: [phone] Sales
Fax: [phone]
[e-mail]
www.united-automation.com
31/03/05