SP1848 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Thermoelectric Cooler

Thermoelectric Cooler
Performance Curves
Environment: One atmosphere dry nitrogen
Hot Side Temperature: 27°C
Hot Side Temperature: 50°C
SP1848
80.0
HEAT
LOAD
(WATTS)
60.0
0.00
2.50
40.0
5.00
7.50
10.0
20.0
12.5
15.0
17.5
0.0
20.0
3.0
2.0
Q=0
1.0
T=0
0.0
0.0
2.0 4.0 6.0 8.0 10.0 12.0
CURRENT (AMPS)
HEAT
80.0
LOAD
(WATTS)
0.00
60.0
2.50
5.00
7.50
40.0
10.0
12.5
20.0
15.0
17.5
20.0
0.0
4.0
3.0
2.0
Q=0
T=0
1.0
0.0
0.0
2.0 4.0 6.0 8.0 10.0 12.0
CURRENT (AMPS)
For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our
Applications Engineers.
Installation
Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional
information, please refer to our TEC Installation Guide.
Operation Cautions
For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To
minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method.
Marlow Industries, Inc.
10451 Vista Park Road
Dallas Texas 75238-1645
TEL: [phone]
FAX: [phone]
Internet: http://www.marlow.com
Marlow Industries Europe
Aberdeen House, South Road
Haywards Heath
West Sussex RH164NG UK
TEL: [phone]
FAX: [phone]
Marlow Industries Asia
1-1-8-401
Uehara, Shibuya-ku
Tokyo, Japan 151-0064
TEL: [phone]
FAX: [phone]
Copyright 2002, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0132, Rev A