|
SLD1X10K00BA Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Precision Resistor 1-2-3 Network(Conformally Coated) | |||
|
◁ |
Performance
Parameters
Test Condition
Max. Rated Operating Temperature
Working Temperature Range
Temperature Cyciling
Overload
Low Temperature Operation
Terminal Strength
Dielectric Withstanding Voltage
Insulation Resistance
Resistance to Soldering Heat
Moisture Resistance
Shock
Vibration
Life(Rated Load)
Life(Moisture Load)
Storage Life
High Temperature Exposure
Ϫ25ÐCÖ30min.,Room TemperatureÖ5min.,125ÐCÖ30min., 5cycles
Rated Voltageϫ2.5, 5 sec.
Ϫ25ÐC, No Load, 2hrs
0.908kg(2pounds),10 sec.
Atmospheric:AC 300V, 1 min.
DC 100V, 1 min.
350ÐC, 3 sec.
Ï©65ÐC to Ϫ10ÐC, 90%RH to 98%RH, Rated Voltage, 10cycles(240hrs)
50G, 11ms, Half-sine Wave, X, Y, Z, each 3 shocks
20G, 10Hz to 55Hz to 10Hz, 1min., X, Y, Z, each 2hrs
70ÐC, Rated Power, 1.5hr.-ON, 0.5hr.-OFF, 1000hrs
40ÐC, 90%RH to 95%RH, Rated Power, 1.5hr.-ON, 0.5hr.-OFF, 1000hrs
15ÐC to 35ÐC, 15%RH to 75%RH, No Load, 10000hrs
125ÐC, No Load, 1000hrs
ALPHA Specification
ALPHA Typical Test Data
â¬R
â¬Ratio
â¬R
â¬Ratio
70ÐC
Ϫ25ÐC to Ï©125ÐC
Ϯ0.05%
Ϯ0.05%
Ϯ0.05%
Ϯ0.05%
Ϯ0.01%
Ϯ0.01%
Ϯ0.01%
Ϯ0.01%
Ϯ0.01%
Ϯ0.0025%
Ϯ0.0025%
Ϯ0.0025%
Ϯ0.005%
Ϯ0.001%
Ϯ0.001%
Ϯ0.001%
Ϯ0.03%
Ϯ0.01%
over 10,000Mâ
Ϯ0.0025% Ϯ0.001%
over 10,000Mâ
Ϯ0.03%
Ϯ0.1%
Ϯ0.03%
Ϯ0.03%
Ϯ0.01%
Ϯ0.05%
Ϯ0.01%
Ϯ0.01%
Ϯ0.0025%
Ϯ0.03%
Ϯ0.005%
Ϯ0.005%
Ϯ0.001%
Ϯ0.01%
Ϯ0.001%
Ϯ0.001%
Ϯ0.1%
Ϯ0.05%
Ϯ0.01%
Ϯ0.005%
Ϯ0.05%
Ϯ0.02%
Ϯ0.05%
Ϯ0.01%
Ϯ0.01%
Ϯ0.01%
Ϯ0.01%
Ϯ0.005%
Ϯ0.01%
Ϯ0.005%
Ϯ0.0025%
Ϯ0.005%
Example of Applications
An Application of Type SLD (InputÖfeed-back resistors for amplifiers)
Because the input and the feedback resistors are incorporated into one single
element, amplification is not affected by temperature change.
R1
R2
R2
R1
VIN
VOUT
|