S8132 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – FINGERPRINT IDENTIFICATION IC Bio-Crypto Controller

An IC Design Company
5F-14, No.12, Lane 609, Chung Hsin Rd., Sec.5, San Chung City,
Taipei Hsien, Taiwan
Tel. [phone] [phone]
Fax [phone]
E-MAIL: [e-mail]
SongRock
TechnologyCorp.
FINGERPRINT IDENTIFICATION IC
S8132
Bio-Crypto Controller
LQFP-100
Information provided here is subject to change without notice. All rights reserved
BLOCK DIAGRAM
Crystal
OSC/PLL
CPU
2X8K Byte Cache
Wireless Interface Logic
Fingerprint Parallel
Interface Logic
UART 1, 2 & 3
ROM 256K Byte
SRAM 256K Byte
Flash 512K Byte
SPI Interface
GPIO x 32
I2C Master/Slave
Package 100 Leads LQFP (14X14X1.6mm)
PWM_O
RF PWM
Receiver
Fingerprint
Sensor
MCU
LCD/Keyboard
Serial Flash
LEDs/Switches
I2C
FINGER PRINT VERIFICATION SPECIFICATION
Fingerprint template size
Max fingerprint templates
False Acceptance rate (FAR)
False Rejection rate (FRR)
Verification time (100 templates)
360 byte / fingerprint template
250
< 1 in 10000
< 1 in 1000
< 1 sec
DC PARAMETERS
Parameter
Ratings
Unit
Operating Temperature Range (T_opr)
0 to +70
O_C
Storage Temperature Range
-40 to +125
O_C
Lead Temperature Range (soldering, 10 seconds)
+260
O_C
Maximum IO Supply Voltage, V_IO
Maximum Core Supply Voltage, V_dd
Maximum Input Voltage
+3.63
V
+2.75
V
+5.00
V
Note: The absolute maximum ratings are rated values, which must not be exceeded during operations, even for an instant.
Any one of the ratings must not be exceeded. If any absolute maximum rating is exceeded, a device may break down or
its performance may be degraded, causing it to catch fire or explode resulting in injury to the user. Thus when designing
products which include this device, ensure that no absolute maximum rating value will ever be exceeded.
S8132_brochure Rev 1 (Short)
2/2
Feb. 06, 2006