RM805 Datasheet, PDF (2/10 Pages) List of Unclassifed Manufacturers – POWER AMPLIFIER MODULE FOR BROADBAND

Electrical Specifications
RM805
Power Amplifier Module for Broadband
Electrical Specifications
The following tables list the electrical characteristics of the RM805 Power Amplifier. Table 1 lists
the absolute maximum rating for continuous operation. Table 2 lists the recommended operating
conditions for achieving the electrical performance listed in Table 3, which depicts the electrical
performance of the RM805 Power Amplifier over the recommended operating conditions.
Table 1. Absolute Maximum Ratings⁽¹⁾
Parameter
RF Input Power⁽²⁾
Supply Voltage
Regulation Voltage
Case Operating Temperature
Storage Temperature
Symbol
Pin
Vcc
Vreg
Tc
Tstg
Minimum
—
—
0.0
–30
–55
Nominal
–8.0
3.5
2.75
+25
—
Maximum
11.0
6.9⁽³⁾
Vcc⁽⁴⁾
+110
+125
Unit
dBm
Volts
Volts
°C
°C
NOTE(S):
(1) _{No damage assuming only one parameter is set at limit at a time with all other parameters set at or below}
nominal value.
(2) _{Pulsed operation at 25% duty cycle.}
(3) _{When amplifier is biased off (Vreg = 0 V)}
(4) _{Voltage on Vreg pin may not exceed the applied Vcc voltage.}
Table 2. Recommended Operating Conditions
Parameter
Symbol
Supply Voltage
Regulation Voltage
Operating Frequency
Continuous RMS Output Power
Operating Temperature
Vcc
Vreg
Fo
PoRMS
To
Minimum
3.0
2.65
806
–30
Nominal
3.5
2.75
—
29.0
+25
Maximum Unit
4.4
Volts
2.85
Volts
849
MHz
31.0
dBm
+85
°C
2
Skyworks Solutions, Inc., Proprietary
101505D
December 6, 2002