PIC16F876A Datasheet, PDF (2/4 Pages) List of Unclassifed Manufacturers – PICGraph Demoboard

PICGraph Demoboard
www.lpelettronica.it
Layout and Dimensions
Figure 1 – Board layout and dimensions (Top View)
Jumper Configuration
JUMPER Status
Open
Shorted
Description
RS232 port is used for In-Circuit Serial Programming (ICSP). This
mode is typically used to program a bootloader on a new
microcontroller.
RS232 port is used for serial communication with microcontroller.
Table 1 – Jumper configuration
1