MG200 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – EnFlex MG-200 Control Server Gateway

EnFlex MG-200 Gateway
The MG-200 is a Linux-based workstation, and provides a complete implementation of TCP/IP networking,
including SLIP, PPP, NFS, etc. It supports a range of TCP/IP services such as FTP, Telnet, etc.
The MG-200 is shipped with the complete EnFlex Application Software environment, including the embedded
EnFlex Web Server, EnFlex Script^® and EnFlex Connect™. It supports EnFlex Smart I/O controllers, LONWORKS-
based EnFlex devices, and EnFlex Sensor Bus devices. Additional interfaces may be developed by users for any 3^rd
party equipment that communicates over RS-232 or RS-485.
The MG-200 is enclosed in a rugged and compact 5” X 8.25” X 2.5” solid aluminum case that can be mounted in any
position. The MG-200L can be located outdoors if it is protected from direct exposure to weather.
Network Interfaces
The MG-200 provides data interfaces to the following networks:
Type
Media
Connector
Protocols
Ethernet
10 Base T
RJ-45
RS-232 (COM1) Three-wire Serial
Screw Terminals
RS-232 (COM2) Seven-wire Serial with Screw Terminals
Modem Control
RS-485 (COM3) Three-wire Serial
(Twisted shielded
pair)
Screw Terminals
RS-232 (COM4) Seven-wire Serial with RJ-45
Modem Control
RS-485 (COM5) Three-wire Serial
(Twisted shielded
pair)
Screw Terminals
Expansion Ports As Required
Screw Terminals
Console Port Three-wire Serial
Screw Terminals
Device Bus
Twisted Pair
Screw Terminals
TCP/IP
LONWORKS, User Defined
TCP/IP-PPP (External Modem),
LONWORKS, User Defined
EnFlex Smart I/O, Danfoss VSD,
Modbus, User Defined
TCP/IP-PPP (External Modem),
LONWORKS, User Defined
EnFlex Smart I/O, Danfoss VSD,
Modbus, User Defined
User Defined, LONWORKS FTT
VT100
Dallas Digital Sensor Bus
Expansion Modules
The MG-200 has two expansion ports that accommodate plug-in expansion modules. Modules are installed
inside the enclosure and facilitate connection of additional networks or devices. A LONWORKS FTT-10
interface module will be available. Additional expansion modules to be developed in the future may support
CEBus, HDSL, ADSL, X10, Powerline Carrier, etc.
Suggested Applications
The EnFlex MG-200 can be used in numerous applications, including the following:
• Stand-alone intelligent utility meter interface
• Gateway to third-party networks and devices
• Generator monitoring and control
• Data acquisition
• Real-time metering and sub-metering
• Facility management
• Environmental monitoring
• Security and access monitoring
Page 2
July 2003
60ENMG200CSG