IS3052 Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – OPTICALLY COUPLED RANDOM PHASE NON-ZERO CROSSING TRIAC DRIVERS

ELECTRICAL CHARACTERISTICS ( T = 25°C Unless otherwise noted )
A
PARAMETER
MIN TYP MAX UNITS
Input
Output
Forward Voltage (V )
F
Reverse Current (I_R)
Peak Off-state Current ( I )
DRM
Peak Blocking Voltage ( V_DRM )
1.2 1.5 V
100 µA
100 nA
550
V
On-state Voltage ( V )
TM
Critical rate of rise of off-state
Voltage@ 400V ( dv/dt ) ( note 1 )
1.5 3.0 V
1000
V/µs
TEST CONDITION
I = 10mA
F
V_R = 3V
V = 550V (note 1 )
DRM
I = 100nA
DRM
I = 100mA ( peak )
TM
Coupled Input Current to Trigger ( I_FT )(note 2 )
10 mA
V_D = 3V ( note 2 )
Holding Current , either direction ( I_H )
200
Input to Output Isolation Voltage V_ISO 5300
7500
µA
V_RMS
V_PK
See note 3
See note 3
Note 1. Test voltage must be applied within dv/dt rating.
Note 2. Guaranteed to trigger at an I value less than or equal to max. I , recommended I lies
F
FT
F
between Rated I_FT and absolute max. I_FT .
Note 3. Measured with input leads shorted together and output leads shorted together.
5/12/00
DB92762m-AAS/A1