FLUKE-414D Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Fluke 424D, 419D and 414D Laser Distance Meters

General specifications
Distance measurement
Typical measuring tolerance^[1]
Maximum measuring tolerance^[2]
Range at Leica target plate GZM26
Typical range^[1]
Range at unfavorable condition^[4]
Smallest unit displayed
Power Range Technology™
laser point at distances
Tilt measurement
Measuring tolerance to laser beam^[5]
Measuring tolerance to housing^[5]
Range
General
Laser class
Laser type
Protection class
Automatic laser off
Automatic power off
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03
Size (HxWxD)
Weight (with batteries)
Temperature range:
Calibration cycle
Maximum altitude
Maximum relative humidity
Storage
Operation
Safety
EMC
414D
419D
424D
± 2.0 mm^[3]
± 3.0 mm^[3]
50 m/165 ft
40 m/130 ft
35 m/115 ft
1 mm /¹/16 in
no
6/30/60 mm (10/50/100 m)
0.23/1.18/2.36 in (32.8/164/330)
± 1.0 mm^[3]
± 2.0 mm^[3]
80 m/260 ft
100 m/330 ft
80 m/260 ft
80 m/260 ft
60 m/195 ft
60 m/195 ft
1 mm /¹/32 in
yes
yes
6/30/60 mm (10/50/100 m)
0.23/1.18/2.36 in (32.8/164/330)
no
no
± 0.2°
no
no
± 0.2°
no
no
360°
II
635 nm, <1 mW
IP40
IP54
After 90 seconds
After 180 seconds
up to 3,000 measurements
up to 5,000 measurements
116 mm x 53 mm x 33 mm
(4.56 in x 2.08 in x 1.29 in)
127 mm x 56 mm x 33 mm
(5 in x 2.20 in x 1.29 in)
127 mm x 56 mm x 33 mm
(5 in x 2.20 in x 1.29 in)
113 g (3.98 oz)
153 g (5.39 oz)
158 g (5.57 oz)
-25 °C to +70°C (-13 °F to +158 °F)
0 °C to +40 °C (32 °F to +104 °F)
-25 °C to +70°C (-13 °F to +158 °F)
-10 °C to +50 °C (14 °F to +122 °F)
Not applicable
Not applicable
tilt and compass
3000 m
3000 m
3000 m
85 % at 20 °F to 120 °F
(-7 °C to 50 °C)
85 % at 20 °F to 120 °F
(-7 °C to 50 °C)
85 % at 20 °F to 120 °F
(-7 °C to 50 °C)
CAN/CSA-C22.2 No. 61010-1-04, UL Std. No. 61010-1 (2nd Edition), ISA-82.02.01,
IEC Standard No. 61010-1:2001, EN60825-1:2007 (Class II)
61326-1:2006
[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C (13 °F).
[2] Applies for 10 % to 500 % target reflectivity, high background illumination, -10 °C to +50 °C (14 °F to
+122 °F).
[3] Tolerances apply from 0.05 m to 10 m (0.001 ft to 32.8 ft) with a confidence level of 95 %. The
maximum tolerance may deteriorate to 0.1 mm/m (0.003 in/ft) between 10 m to 30 m (32.8 ft to 98.4 ft)
and to 0.15 mm/m (0.005 in/ft) for distances above 30 m (98.4 ft).
[4] Applies for 100 % target reflectivity, background illumination between 10’000 lux and 30’000 lux.
[5] After user calibration. Additional angle related deviation of ± 0.01° per degree up to ± 45° in each
quadrant. Applies at room temperature. For the whole operating temperature range the maximum
deviation increases by ± 0.1°.
Ordering information
Fluke 424D
Fluke 419D
Fluke 414D
Laser Distance Meter
Laser Distance Meter
Laser Distance Meter
All models include: Laser distance meter, two AAA
batteries, users manual on CD, quick reference guide,
vinyl carrying pouch, and three-year warranty
Why use a distance meter?
Instant measurements up to 100 meters/330 feet. Just point, click, done.
Measure with greater accuracy. Up to ± 1 mm. No scales to interpret or misread.
Do the work of two. Instead of holding the tape, your helper can do other jobs.
Speed up the job. Easily measure hard-to-access areas, like high ceilings, without
climbing a ladder.
Keep it on the level. New inclination sensor on the Fluke 424D helps with leveling,
height tracking, and measuring around obstacles.
Reduce estimating errors—let the meters do the math. Find area and volume. Easily
add and subtract distances. Use Pythagoras calculations for height.
Trust Fluke tools. Rugged and reliable, dust- and splash-proof, you can work indoors
and out with confidence, because they’re Fluke tools.
For more information visit www.fluke.com/distance
2 Fluke Corporation Fluke 424D, 419D, and 414D Distance Meters
Fluke. Keeping your world
up and running.®
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2007-2012 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 4/2012 3028711E D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.