FAD1531024 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Dupline® Field- and Installationbus Receiver with Analog Current Output

FAD 1530, FAD 1531, FAD 1532
Supply Specifications
General Specifications
Power supply
Rated operational voltage
through pins A1 & A2 220
120
024
Frequency
Voltage interruption
Rated operational power
Rated impulse
220
withstand voltage 120
024
Dielectric voltage
Supply - Dupline
Supply - Output
Overvoltage cat. III (IEC 60664)
230 VAC +6%,
-15% (IEC 60038)
120 VAC ± 10% (IEC 60038)
24 VAC ± 10%
45 to 65 Hz
≤ 40 ms
Typ. 2.5 VA
4 kV
2.5 kV
800 V
≥ 2 kVAC (rms)
≥ 2 kVAC (rms)
Output OFF delay
upon loss of Dupline carrier
Power ON delay
Environment
Degree of protection
Pollution degree
Operating temperature
Storage temperature
Humidity (non-condensing)
Mechanical resistance
Shock
Vibration
Dimensions
Material
(see "Technical Information")
Weight
Approvals
Undefined
Undefined, ≤ 1 s
IP 20
3 (IEC 60664)
-20° to +50°C (-4° to +122°F)
-50° to +85°C (-58° to +185°F)
20 to 80%
15 G (11 ms)
2 G (6 to 55 Hz)
D-housing
200 g
CSA, UL
Mode of Operation
Operation Diagram
Receiver with current signal
output. The binary status of
an entire channel group (8 bit)
is converted to a current sig-
nal. The binary status of the
selected group may be gen-
erated by Dupline transmit-
ters with analog inputs (cur-
rent, voltage, temperature
etc.) or by PC’s.
The least significant bit (influ-
encing the output current by
0.392% of full scale) is the
highest channel of the select-
ed group (C8 if FMK C is
plugged in). The most signifi-
cant bit (influencing the output
current by 49.8% of full scale)
is the lowest channel of the
selected group (C1 in the
above example).
Note: Analog receivers must
not be used in systems where
channel generators with 2 or 3
sequences are installed.
Output
signal
MSB =
Most Significant Bit
LSB =
Least Significant Bit
Channel status
Wiring Diagram
Load
Accessories
Socket◊
Socket cover
Hold down spring◊
Front mounting bezel
DIN-rail for D 411
D 411
BB 5
HF
FRS 2
FMD 411
For further information refer to "Accessories".
S: signal wire.
Power
Supply
2
Specifications are subject to change without notice (01.09.99)