ER58000 Datasheet, PDF (2/3 Pages) List of Unclassifed Manufacturers – Managed Hardened 8-port 10/100BASE M12 PoE with 2-port Gigabit M12/LC

01 ER58000 Series
Specifications
Technology
Standards
Forward and
Filtering Rate
Packet Buffer
Memory
Processing
Type
Address Table
Size
Power
Input
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3ab 1000BASE-T
IEEE802.3z 1000BASE-SX/1000BASE-LX
IEEE802.3x, Full duplex and flow control
IEEE802.1p, QoS
IEEE802.1Q, Tag VLANs
IEEE802.1w, RSTP
IEEE802.1x, Port-based Network Access Control
IEEE802.1s MSTP
IEEE802.3ad LACP
IEEE802.3af/at Power over Ethernet (PoE)
14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps
2M bits
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex
flow control
8192 MAC addresses
Redundant power inputs: M23: 24 to 48VDC
Power
Consumption
Device: Mac. 10W (without PoE)
PoE power budget (depends on power input):
120W Max.
PoE Power
Output
Port 1 to 8
IEEE802.3at: up to 30W/port, 47-57VDC
Supports overload current protection
Supports reverse polarity protection
Mechanical
Casing
Dimensions
Weight
Metal case
IP50
288mm (W) x 161.5mm (D) x 64mm (H)
(11.3" (W) x 6.4" (D) x 2.5" (H))
2.3Kg (5.07lbs.)
Installation
Panel Mount
Interface
Ethernet Port
Console Port
10/100BASE-M12 D-Code 4-pin Female: 8 ports
Gigabit-M12 A-Code 8-Pin Female/LC: 2 ports
Port: One M12 RS-232 port
LED Indicators
Per Unit: Power Status (Power1, Power2)
Per Port:
10/100TX-M12: Link/Activity (Green)
10/100/1000-M12, 1000LC: Link/Activity (Green)
Alarm Contact
One relay M12 A-Code 4-Pin Female output with current
1A @ 250VAC
Environment
Operating Temperature
Storage Temperature
Ambient Relative Humidity
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
-40°C to 85°C (-40°F to 185°F)
5% to 95% (non-condensing)
Regulatory Approvals
ISO
EN50155
EMI
FCC Part 15, Class A
EN61000-6-4
EMS
EN61000-6-2
EN61000-4-2
(ESD Standards)
EN61000-4-3
(Radiated RFI Standards)
Manufactured in an ISO9001 facility
EN55022
EN55011 (for EN50155)
Contact: + / - 6KV
Air: + / - 8KV
10V/m, 80 to 1000MHz; 80% AM, 1kHz
3V/m, 1400 to 2000MHz; 80% AM, 1kHz
1V/m, 2000 to 3000MHz; 80% AM, 1kHz
(for EN50155)
20V/m, 80 to 1000MHz; 80% AM, 1kHz
10V/m, 1400 to 2100MHz; 80% AM, 1kHz
5V/m, 2100 to 2500MHz; 80% AM, 1kHz
EN61000-4-4
(Burst Standards)
Signal Ports: + / - 4KV;
D.C. Power Ports: + / - 4KV;
EN61000-4-5
(Surge Standards)
Signal Ports: + / - 1KV; Line-to-Earth
D.C. Power Ports: + / - 0.5KV Line-to-Line
+ / - 0.5KV Line-to-Earth
(for EN50155)
D.C. Power Ports: + / - 1KV Line-to-Line
+ / - 2KV Line-to-Earth
EN61000-4-6
(Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz;
80% AM
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz;
80% AM
EN61000-4-8
(Magnetic Field Standards)
30A/m @ 50, 60Hz
Environmental Test Compliance
IEC61373
(Vibration)
(for EN50155)
Vibration Test
- Refer to EN61373 section 8 Table 1
Catagory 1 Class A
- Wave form: Random wave in
operating conditon
- Duration: 10 minutes
Simulated long life test
- Refer to EN61373 section 9 Table 2
Catagory 1 Class A
- Wave form: Random wave in
operating conditon
- Duration: 5 hours
IEC61373
(Shock)
IEC600680-2-32 Ed
(Free Fall)
(for EN50155)
Refer to EN61373 section 10 Table 3
Catagory 1 Class A
Pulse shape: Half-sine pulse
Peak acceleration: 3g
Duration: 30ms in operating condition
Number shock: 3 shocks for each condition
1m (3.281ft.)
www.etherwan.com 2