DG1111C Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – D_1111C Series, Ultra Compact InGaN/SiC SMT LED

s Absolute Maximum Ratings
Item
Symbol
Green
DG
Power Dissipation
Pd
76
Forward Current
IF
20
Peak Forward Current
IFM
48
Reverse Voltage
VR
5
Operating Temperature _Topr
Storage Temperature
Tstg
Derating*
∆IF
Bluish-Green
DC
76
20
48
5
-40 to +85
-40 to +100
0.28 (DC) 0.69 (Pulse)
Blue
DB
76
20
48
5
(Ta=25°C)
Units
mW
mA
mA
V
°C
°C
mA/°C
* Ta=25°C, IFM applies for the pulse width ≤ 1msec. and duty cycle ≤1/20.
s Operation Current Derating Chart (DC)
DG, DC, DB,
s Taping Specifications
φ
1.5
+0.1
0
4+0.1
(1)
(φ 0.5)
Center Hole
2+0.05
4+0.1
Direction to pull
(0.2)
Center Hole
(0.9)
Quantity on tape:
4000 pieces
per reel
φ 21+0.8
2+0.5
φ 13+0.2
s Spatial Distribution
s Precautions
11.4+1
9+0.3
φ 180+30
Please follow these handling precautions to prevent damage to the chip and
ensure its reliability.
1. Soldering conditions:
• Soldering iron: Temperature at tip of iron: 280°C max. (30W max.)
Soldering time: 3 sec. max.
• Dip soldering: Preheating: 120 ~ 150°C max. (resin surface temp.)
60 ~ 120 sec. max. Bath temperature: 260°C max. Dipping Time: 5 sec. max.
• Reflow Soldering:
°C
Operation Heating
240
150
Temperature
Pre-heating rise: 5°C/sec.
120
Cooling:
—5°C/sec.
0
60 to 120 sec.
5 sec. max
2. Cleaning:
• If cleaning is required, use the following solutions for less than 1 minute,
at less than 40°C.
• Appropriate chemicals: Ethyl alcohol and isopropyl alcohol.
• Effect of ultrasonic cleaning on the LED resin body differs depending on such
factors as the oscillator output, size of PCB and LED mounting method. The
use of ultrasonic cleaning should be enforced at proper output after confirming
there is no problem.
Product specifications subject to change without notice. PGD1111C-0301
Stanley Electric Sales of America, Inc.
2660 Barranca Parkway, Irvine, CA 92606 • Tel: 800-LED-LCD1 (533-5231) • Fax: [phone]
Website: www.stanley-electric.com