BCM8129 Datasheet, PDF (2/2 Pages) Broadcom Corporation. – MULTI RATE 10 GBPS SONET SDH / 10GE / FEC DEMUX

OVERVIEW
RB_LD
TH_LOS0/1/2
RB_SLOS
POLSEL
CML 10 G Serial Input
RDINP
RDINN
RB_OFFSETP/N
ENB_OFFSET
LSBSEL
Divide by 16 or 64
LVPECL Reference Clock
RxREFCLKP
RxREFCLKN
RxRATESEL0/1
RxMUTEDOUT
VCP
VCN
RxLCKREF
RxREFSEL
RxMUTEPOCLK
RxMUTEMCLK
RxPHSADJ0/1/2
LOS
DETECT
CDR
Divide-by-16
Divide-by-4
LOSB
RxDOUT0P
RxDOUT0N
LVDS 16-Bit XSBI Output
RxDOUT15P
RxDOUT15N
RxPOCLKP
Divide by 16 LVDS Clock Output
RxPOCLKN
RxMCLKP
RxMCLKN
Divide by 16 or 64 LVDS Clock Output
RxLOCKERR
The BCM8129 is a fully integrated MSA-compliant quad-rate SONET/
SDH/10GE receiver operating at OC-192 (9.953 Gbps), 10GE (10.3125
Gbps), 10GFC (10.315 Gbps), and different FEC (Forward Error
Correction) data rates (10.664/10.709, 11.096, or 11.31 Gbps) with
deserializer, clock and data recovery (CDR), loss-of-signal (LOS)
detection circuitry and advanced feature set. The BCM8129 provides
high-jitter tolerance and low-jitter generation to comply with Optical
Internetworking Forum (OIF), IEEE 802.3ae, Telcordia, ANSI, and
ITU-T standards.
The BCM8129 reference clock input frequency is user-selectable to the
line rate divided by either 16 or 64. The reference clock output and the
LVDS receive parallel bus output can be squelched under user control.
The BCM8129 can be powered with a single 1.8V supply or dual 1.8/
3.3V supply without any special power supply sequencing requirements.
The BCM8129 comes in a 15 x 15 mm, 143-pin BGA package.
Broadcom^®, the pulse logo, and Connecting everything^® are trademarks of Broadcom Corporation and/
or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the
property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
8129-PB02-R
04/13/04
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.broadcom.com