1017A Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – PIEZOELECTRIC ACCELEROMETER

Quality
Innovations
Customer Satisfaction
PIEZOELECTRIC ACCELEROMETER
SPECIFICATIONS
The following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75°F (+24°C) and
100 Hz, unless otherwise noted. Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied.
MODEL
1017A
DYNAMIC CHARACTERISTICS
Axial Sensitivity
Transverse Sensitivity
Frequency Response
Resonance Frequency
Amplitude Response [1]
+5%
+ 1 dB
Temperature Response
Amplitude Linearity
UNITS
pC/g
%
Hz
Hz
Hz
%
ELECTRICAL CHARACTERISTICS
Output Polarity
Resistance
GΩ
Capacitance
pF
Grounding
ENVIRONMENTAL CHARACTERISTICS
Temperature Range
Humidity
Shock Limit
g pk
Base Strain
equiv. g pk/µ strain
Magnetic Field Sensitivity
equiv. g rms/gauss
(/T)
Thermal Transient Sensitivity
equiv. g pk/°F (/°C)
PHYSICAL CHARACTERISTICS
Weight
Case Material
Mounting
Piezoelectric Material
Structure
Output Connector
oz (grams)
2
≤5
See Typical Amplitude Response
21,000
1 to 5000
0.5 to 7000
See Typical Temperature Response
<1
Acceleration directed from the base into
the transducer is defined as positive
>1
300
Signal ground connected to case
-40°F to 302°F (-40°C to +150°C)
Epoxy sealed
2000
0.002
1E-5 (1)
0.018 (0.01)
0.1 (2.8)
Stainless Steel
Adhesive [2]
PZT-5
Annular Shear
10-32 receptacle, top mounting
ACCESSORIES
Included:
9006-120 Cable, Low Noise 10-32/10-32, 10 ft (3.3 m)
Calibration Certificate
Optional:
9604 Cable Adapter 10-32/10-32
(extend cable length)
NOTES
1. Low end response of the transducer is a function of
its electronics.
2. Adhesives such as cyanoacrylate epoxy (super
glue), petro-wax and hot-melt glue and may be
used to mount the accelerometer.
VIP Sensors
California, USA
Ph [phone]
Fx [phone]
[e-mail]
www.vipsensors.com
VIP Sensors reserves the right to modify
these specifications without notice. V01