English
Language : 

TH7120 Datasheet, PDF (17/28 Pages) List of Unclassifed Manufacturers – 300 to 930MHz FSK/FM/ASK Transceiver
TH7120
300 to 930MHz
FSK/FM/ASK Transceiver
AC System Characteristics of the Receiver Part
all parameters under normal operating conditions, unless otherwise stated; all parameters based on test
circuits for FSK (Fig. 4 to 5), FM and ASK (Fig. 6 to 7), respectively; RF at 433.92 MHz
Parameter
Symbol
Condition
Min Typ Max Unit
Input sensitivity – FSK
Pmin_FSK BIF = 150kHz
-103
dBm
∆f = ± 50 kHz (FSK/FM)
BER ≤ 3⋅10-3
Input sensitivity – ASK
Pmin_ASK
BIF = 150kHz
BER ≤ 3⋅10-3
-105
dBm
Maximum input signal – FSK/FM
at low gain
Maximum input signal – FSK/FM
Pmax_FSK_1
Pmax_FSK_0
BER ≤ 3⋅10-3
VGAIN_LNA > 1.4 V
BER ≤ 3⋅10-3
10
dBm
-10
dBm
at high gain
VGAIN_LNA < 0.8 V
PRELIMINARY Maximum input signal – ASK
at low gain
Maximum input signal – ASK
at high gain
Pmax_ASK_1
Pmax_ASK_0
BER ≤ 3⋅10-3
VGAIN_LNA > 1.4 V
BER ≤ 3⋅10-3
VGAIN_LNA < 0.8 V
Image rejection
Blocking immunity
∆Pimag
∆Pblock
∆fblock > ±2MHz, note 1
Start-up time – FSK/FM
TFSK
TE/SDTA=0,
RE/SCLK=1
valid data at output
Start-up time – ASK
TASK
depends on ASK de-
tector time constant and
start-up mode, valid
data at output
Spurious emission
Pspur
Notes: 1. desired signal with FSK/FM or ASK modulation, CW blocking signal
-20
dBm
0
dBm
TBD
dB
TBD
dB
1
ms
TFSK
ms
+
200K * C6
-70 dBm
AC System Characteristics of the Transmitter Part
all parameters under normal operating conditions, unless otherwise stated;
typical values at Ta = 23 °C and Vcc = 3 V;
TE/SDTA=1, RE/SCLK=0, ASK/FSK=1, RPS≥15 kΩ, fc = 433.92 MHz, test circuit shown in Fig. 4 to 7
Parameter
Symbol
Condition
Min Typ Max Unit
Output power
FSK deviation
Data rate FSK
FM deviation
Modulation frequency FM
Data rate ASK
PLL spurs emission
Harmonic emission
VCO gain
Charge pump current
Start-up time
Po
CW mode
4
6
8
dBm
∆fFSK
depends on Cx1, Cx2 and
±5
±50
±100
kHz
crystal parameter
RFSK
∆fFM
fmod
RASK
Pspur
Pharm
KVCO
ICP
TTX
adjustable with varactor
and VFM
at all fc and nominal Po
at all fc and power steps
from ”standby” to
“transmit” mode
60
kbit/s
±6
kHz
5
kHz
60
kbit/s
-36 dBm
-
-36 dBm
35
MHz/V
260
µA
1
ms
3901007120
Rev. 005
Page 17 of 28
Data Sheet
Jan. 2002