|
T-51513D104J-FW-A-AD Datasheet, PDF (17/17 Pages) List of Unclassifed Manufacturers – LCD Module Technical Specification | |||
|
◁ |
10. RELIABILITY TEST CONDITION
(1) Temperature and Humidity
TEST ITEM
HIGH TEMPERATURE
HIGH HUMIDITY OPERATION
HIGH TEMPERATURE OPERATION
LOW TEMPERATURE OPERATION
HIGH TEMPERATURE STORAGE
LOW TEMPERATURE STORAGE
THERMAL SHOCK (NON-OPERATION)
CONDITIONS
40°C, 90%RH, 240h
(No condensation)
70°C, 240 h
â20°C, 240 h
80°C, 240 h
â20°C, 240 h
BETWEEN â20°C (1h) and 80°C(1h),
100 CYCLES
(2) Shock & Vibration
ITEM
SHOCK
(NON-OPERATION)
CONDITIONS
Shock level: 1470m/s2 (150G)
Waveform: half sinusoidal wave, 2ms
Number of shocks: one shock input in each direction of three mutually
perpendicular axis for a total of six shock inputs
VIBRATION
(NON-OPERATION)
Vibration level: 9.8m/s2 (1.0G)
Waveform: sinusoidal
Frequency range: 5 to 500Hz
Frequency sweep rate: 0.5 octave /min
Duration: one sweep from 5 to 500 Hz in each of three mutually
perpendicular axis(total 3 hours)
(3) Judgment standard
The judgment of the above tests should be made as follow:
Pass: Normal display image, no damage of the display function. (ex. no line defect)
Partial transformation of the module parts should be ignored.
Fail: No display image, damage of the display function. (ex. line defect)
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 17/32
|