English
Language : 

GF9105A Datasheet, PDF (17/37 Pages) List of Unclassifed Manufacturers – MultiGENTM GF9105A Component Digital Transcoder
◁
OUTPUT/INPUT = 0, HVF_OUT = 0
13 BIT PHYSICAL INTERFACE
DATA PORT REFERENCE
Output Port: P512..0 to P712..0
13-bit Two’s Complement output
b12
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
b12
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P512..0 to P712..0
b11
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
12 bit Two’s Complement output (b11
extended)
Output Port: P512..0 to P712..0
10 bit unsigned output
0
0
0
b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P810..0
11-bit Two’s Complement output
NA
NA b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P810..0
10 bit unsigned output
NA
NA
0
b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
OUTPUT/INPUT = 0, HVF_OUT = 1
13 BIT PHYSICAL INTERFACE
DATA PORT REFERENCE
Output Port: P112, P212 or P312
b12
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
H, V or F -
-
-
-
-
-
-
-
-
-
-
-
output
Output Port: P512..0 to P712..0
13-bit Two’s Complement output
b12
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P512..0 to P712..0
b11
b11 b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
12-bit Two’s Complement output (b11
extended)
Output Port: P512..0 to P712..0
10 bit unsigned output
0
0
0
b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P810..0
11 bit Two’s Complement output
NA
NA b10 b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
Output Port: P810..0
10 bit unsigned output
NA
NA
0
b9
b8
b7
b6
b5
b4
b3
b2
b1
b0
When the device is configured for outputting non-multiplexed data and RND8/10 is set high, the output bit weighting is
slightly modified. For non-multiplexed output formats, the device may output 11-bit two’s complement,10-bit two’s
complement or 8-bit unsigned data on Processing Core output data ports C5-C7, and 9-bit two’s complement or 8-bit
unsigned data may be output on Processing Core output data port C8. Note that when HVF_OUT=1 and OUTPUT/INPUT=1
the MSB of the 11-bit two’s complement output is not available. In this case, the output data is clipped to a 10-bit two’s
complement number (-512 to + 511). Bit 12 (b12) of the physical interface is used to output the H, V and F output signals.
The output data will be embedded within the physical 13-bit output ports as shown below.
17
521 - 88 - 03
 ▷