VFD-L Datasheet, PDF (15/16 Pages) List of Unclassifed Manufacturers – User Manual

14
Standard Specifications
Voltage Class
Model Number VFD- L A/B
Weight g (lb) A (standard)
Weight g (lb) B (build-in EMI filter)
Max. Applicable Motor Output (W)
Rated Output Capacity (VA)
115V Class
40W
001
270 (0.60) 440 (0.97)
350 (0.77) 525 (1.16)
25/40
60/100
106/152 212/303
230V Class
40W
001
260 (0.57) 430 (0.95)
340 (0.75) 510 (1.12)
25/40
60/100
106/152 212/303
Rated Output Current (A)
0.28/0.4 0.56/0.8 0.28/0.4 0.56/0.8
Maximum Output Voltage (V)
Two times proportion to Proportional to Input
Input Voltage
Voltage
Rated Frequency (Hz)
1.00 to 120.00 Hz
Rated Voltage/Frequency
Single phase
100 to 120 VAC
50/60 Hz
Single phase
200 to 240 VAC 50/60Hz
Voltage/Freq. Tolerance
Voltage: ±10%, Frequency: ±5%
Input Current (A)
Control Systems
Torque Setting
1.1A 1.5A 2.2A 3.0A 0.5A 0.7A 1.0A 1.4A
SVPWM (Space Vector Pulse Width Modulation,
carrier frequency 10kHz)
High/Low, Switching
Overload Endurance
150% of rated current for 1 minute
Accel/Decel Time
0.05 to 30.0 seconds
Torque Promotion
Torque Boots: 0 or 8%
Frequency Setting
Potentiometer
Operation Setting ^Panel
RUN/STOP, FORWARD/REVERSE
Signal
Ext. Terminal RUN/STOP, FORWARD/REVERSE, RS-485
Panel
Fault Indication (LED Flash)
Output Indiction
Ext. Terminal Fault Indication (Open Collector)
Protection
Cooling
Installation Location
Pollution Degree
Ambient Temperature
Storage Temperature
Self-testing, Over Voltage, Over Current, Under
Voltage, Overload, Overheating, Thermal.
Natural air-cooling
Altitude 1,000m or lower, keep from corrosive
gasses, liquid and dust
2
-10^oC to 40^oC (Non-Condensing and not frozen)
-20^oC to 60^oC
Ambient Humidity
Vibration
Below 90% RH (non-condensing)
9.80665m/s² (1G) less than 20Hz, 5.88m/s²
(0.6G) at 20 to 50Hz