TGS2442 Datasheet, PDF (15/25 Pages) List of Unclassifed Manufacturers – Detection of Carbon Monoxide

TECHNICAL INFORMATION FOR TGS2442
6. Marking and Packaging
6-1 Batch number
Rank and Lot. No. are indicated on the shrink wrap
on the side of the sensor cap as shown in Figure 24.
Rank Lot No.
A1 001512
Trace no.
Week (01-52)
Gas testing year (00-99)
Based on Rs 100ppm CO (1-4)
Based on β value (A-F)
Figure 24 - Batch number coding
6-2 Packaging method (Fig. 25)
Fifty (50) pieces of sensor are packed in a plastic
container, and five (5) containers are sealed inside a
x5
moistureproof aluminum coated bag. Several bags
are then packed in a carton box (see Fig. 26).
6-3 Label
A label showing product name, Rank and Lot No.,
quantity, and inspection date is affixed to the
aluminum coated bag.
Plastic container for 50pcs.
(188 x 188mm)
Label
6-4 Handling instructions
It is recommended to begin sensor preheating within
24 hours after opening a sealed bag. Please keep
unused sensors in a tightly sealed moistureproof bag.
Aluminum coated bag - holds 250pcs.
(265 x 300mm)
Figure 25 - Packing methodology
Bag
(250 pcs.)
Revised 03/00
2000pcs. (250 pcs. x 8 bags)
Figure 26 - Carton box
13