PCL-818L Datasheet, PDF (15/74 Pages) List of Unclassifed Manufacturers – High-performance DAS card with programmable gain

We set the PCL-818L for a base address of Hex 300 at the factory. If
you need to adjust it to some other address range, set switch SW1 as
shown in the following table:
Card I/O addresses (SW1)
Range (hex) Switch position
123456
000 - 00F
l
l
ll
l
l
010 - 01F
l
l
ll
l
¡
´
200 - 20F
¡l
ll
l
l
210 - 21F
¡l
ll
l
¡
´
* 300 - 30F
¡¡l l
l
l
´
3F0 - 3FF
¡¡¡¡¡¡
¡ = Off l = On
* = default
Note: Switches 1-6 control the PC bus address lines as follows:
Switch 1 2 3 4 5 6
Line A9 A8 A7 A6 A5 A4
Appendix C provides a PC I/O port address map to help you avoid
the I/O addresses for standard PC devices.
DMA Channel Selection (JP1)
The PCL-818L supports DMA data transfer. Jumper JP1 selects the
DMA channel 1 or 3, as shown in the following figure.
Channel 1
Channel 3 (default)
¡¡¡
13
¡¡¡
13
Chapter 2 Installation 11