NSB8 Datasheet, PDF (15/158 Pages) List of Unclassifed Manufacturers – BASIC interpreter for Z80 family

ITALIAN TECHNOLOGY
grifo^®
NSB8 REQUIREMENTS
Only three elements are required to be immediatly up and running:
1) A Z80 based control board like GPC^® 15A,GPC^® 150, GPC^® 15R, GPC^® 153, GPC^® 183,
GPC^® 154, GPC^® 184, etc.
2) The GDOS 80 operating system for the desired control board or a CP/M emulator as Z80MU.
3) A personal computer, connected to the control board through a serial line.
NOTE
This manual uses the definition target board to refer to one of above reported grifo^® hardware
structures.
RECEIVED MATERIAL
The NSB8 software package is made by two disks that contains the software structure needen to
work:
NSB8 DISK
The content of this disk is organized in directories, whose structure recalls the software package
structure; we suggest to copy all the files into an unique work directory, like GDOS 80's one. Here
follows a list of directories and files stored in this distribution disk:
Root
Contains all the most frequently used programs when operating with NSB8, which constitutes the
main work structure:
NSB8.G80
-> Executable NSB8 basic interpreter for GDOS 80 operating system.
LEGGIMI.ITA -> Last minute addition to NSB8 documentation (Italian version)
README.ENG -> Last minute addition to NSB8 documentation (English version)
UTILITY directory
Contains a set of utility programs and proper documentation files:
BASTRA.G80 -> Reduce and optimize the application program
BASTRA.DOC -> User documentation for BASTRA utility
BASYM.G80 -> Create a table with the names of the simbols used in the application program
BASYM.DOC -> User documentation for BASYM utility
EXAMPLE directory
Contains a set of demostration programs that show how to use the features of NSB8 programming
language; this directory may include subdirectories containing demonstration programs for some
cards, some defined hardware resources, etc.
NSB8 USER MANUAL DISK
It's the present manual and reports any technical information about NSB8. In detail this manual
reports informations on instructions, commands, memory areas, program control, variables, etc.
NSB8
Rel. 5.10
Page 3