N150X4-L05 Datasheet, PDF (15/29 Pages) List of Unclassifed Manufacturers – TYPE 15.0 XGA COLOR TFT/LCD MODULE

Engineering Specification
Measurement System
Timming Requirements
Parameter
Symbol Min Typ Max Unit Conditions
Clock Frequency
fc
50
65
67 MHz
Cycle Time
tc
14.93 15.38 20.00 ns
Data Setup Time (Note 1)
Data Hold Time (Note 2)
Tsu
500
Thd
500
ps fc = 65MHz, tCCJ < 50ps,
Vth-Vtl = 400mV,
ps _{Vcm = 1.2V, Vcm = 0}
Cycle-to-cycle jitter (Note 3)
tCCJ -150
+150 ps fc = 65MHz, Tsu=Thd=900ps
Cycle Modulation Rate (Note 4) tCJavg
20 ps/clk fc = 65MHz, Tsu=Thd=900ps
Note :
1. All values are at VDD=3.3V, Ta=25 degree C.
2. See figure "Timing Definition" and "Timing Definition(detail A)" for definition.
3. Jitter is the magnitude of the change in input clock period.
4. This specification defines maximum average cycle modulation rate in peak-to-peak transition within any 100
clock cycles. Figure "Cycle Modulation Rate" illustrates a case against this requirement.
This specification is applied only if input clock peak jitter within any 100 clock cycles is greater than 300ps.
(C) Copyright International Display Technology 2002 All Rights reserved.
February 03,2003
OEM N150X4-L05-01
15/29