AU9226 Datasheet, PDF (15/22 Pages) List of Unclassifed Manufacturers – USB KVM Controller

5.3 [Num]++[Num] Mode
Hot Key Definition
[Num]++[Num]+1
Switch to PC1
[Num]++[Num]+2
Switch to PC2
[Num]++[Num]+→ or ↓
Switch to Next PC
[Num]++[Num]+← or ↑
Switch to Previous PC
[Num]++[Num]+B
[Num]++[Num]+S
[Num]++[Num]+S + n
[Num]++[Num]+F1~F8
Beeper ON/OFF (note2)
Auto-scan mode every 10 second. ([ESC] switch to
regular key code)
Set Auto-scan rate (note3). ([ESC] switch to regular
key code)
Customer define key (note4)
[Num]++[Num]+[Scroll]
Switch to [Scroll]++[Scroll] hot key mode
[Num]++[Num]+[Caps]
Switch to [Caps]++[Caps] hot key mode
[Num]++[Num]+[Ctrl]
Switch to [Ctrl]+[Shift] hot key mode
5.4 [Ctrl]+[Shift] mode (left-hand side)
Hot Key Definition
[Ctrl]++[Ctrl]
Switch to next live PC
[Ctrl + Shift + 1]
Switch to PC1
[Ctrl + Shift + 2]
[Ctrl + Shift + → or ↓]
[Ctrl + Shift + ← or ↑]
Switch to PC2
Switch to Next PC
Switch to Previous PC
[Ctrl + Shift + B]
[Ctrl + Shift + S]
[Ctrl + Shift + S + n]
[Ctrl + Shift + F1~F8]
[Ctrl + Shift + Scroll]
[Ctrl + Shift + Caps]
[Ctrl + Shift + Num]
Beeper ON/OFF (note2)
Auto-scan mode every 10 second. ([ESC] switch to
regular key code)
Set Auto-scan rate (note3). ([ESC] switch to regular
key code)
Customer define key (note4)
Switch to [Scroll]++[Scroll] hot key mode
Switch to [Caps]++[Caps] hot key mode
Switch to [Num]++[Num] hot key mode
Note 1: “++” means press key rapidly, “[Scroll]++[Scroll]+1” means press “Scroll”
twice rapidly and then press “1”. If system receives “Scroll ++ Scroll” command only,
system will reset the buffer when it does not receive any input comes after within a
defined interval of time (say, 5 seconds).
Note 2: Audible feedback when beeper is ON and keep the device in silent mode
when beeper is OFF.
Note 3: n = number from 1 to 9, each represents 5 seconds’ interval latency to 60
seconds correspondingly.
AU9226 USB KVM Controller V1.01W
9