T315XW01 Datasheet, PDF (14/22 Pages) List of Unclassifed Manufacturers – WXGA Color TFT-LCD Module

Note:
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance of L_on1
Contrast Ratio= _{Surface Luminance of Loff1}
2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all
pixels displaying white. From more information see FIG 2. When VDDB = 24V, IDDB = 5A. L_WH=Lon1
Where Lon1 is the luminance with all pixels displaying white at center 1 location.
3. The variation in surface luminance, δWHITE is defined (center of Screen) as:
δ_WHITE(5P)= Minimum(L_on1, L_on2,…L_on5)/Maximum(L_on1, L_on2,…,L_on5)
4. Response time is the time required for the display to transition from to black (Rise Time, Tr_R) and from
black to white (Decay Time, Tr_D). For additional information see FIG3. Some gray to gray response time
could be more than 16ms (75ms Max) because of material limitation.
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface.
For more information see FIG4.
FIG. 2 Luminance
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
T315XW01 V0 - Specs. Ver0.1
No Reproduction and Redistribution Allowed
14/24