PAK-VI Datasheet, PDF (14/16 Pages) List of Unclassifed Manufacturers – 310 Ivy Glen Court

Frequently Asked Questions
Q: Can I run the Pak VI from a different clock
source?
A: You may be able to use a lower clock speed,
but it isn’t recommended. The PWM and serial
communications depend on specific timing.
If you do run at a different clock speed, you can
expect the baud rates to scale accordingly. So
using a 25MHz clock, for example, will cause the
PAK to communicate at 4800 and 1200 baud.
AWC does not support operation at any speed
other than 50MHz.
Q: Is there a second source for the PAK VI?
A: No. However, if you have a high-volume
application and you are concerned about
availability, contact AWC about obtaining a
license to produce your own PAKs or obtain them
from third parties.
Q: What is the state of the PAK at startup?
A: Initially the PAK resets the keyboard, forces
keyboard mode 2 (which should be the default)
and is in cooked mode with autoindicator mode
set.