SLSNNWH834TS Datasheet, PDF (12/15 Pages) List of Unclassifed Manufacturers – WHITE FLASH LED

■ Precaution for Use
1. This device should not be used in any type of fluid such as
water, oil, organic solvent, etc.
When washing is required, IPA should be used.
2. When the LEDs are illuminating, operating current should be decided
after considering the ambient maximum temperature.
3. LEDs must be stored to maintain a clean atmosphere.
If the LEDs are stored for 3months or more after being shipped from
Samsung Electro-Mechanics, a sealed container with a nitrogen atmosphere
should be used for storage.
4. The LEDs must be used within seven days after opening the moisture
proof packing. Repack unused Products with anti-moisture packing,
fold to close any opening and then store in a dry place.
5. The appearance and specifications of the product may be modified for
improvement without notice.
6. This LEDs is sensitive to the static electricity and surge. It is
recommended to use a wrist band or anti-electrostatic glove when
handling the LEDs.
If over voltage which exceeds the absolute maximum rating is applied to
LEDs, it will cause damage LEDs and result in destruction.
Damaged LEDs will show some unusual characteristics such as leak current
remarkably increase, turn-on voltage becomes lower and the LEDs get
unlighted at low current.
SAMSUNG ELECTRO-MECHANICS
SLSNNWH834TS-00(050721) 12/15