English
Language : 

D365A Datasheet, PDF (12/12 Pages) List of Unclassifed Manufacturers – Electroluminescent Lamp Driver IC
Ordering Information:
The D365A IC is available as bare die in probed wafer form or in die tray, and in standard MSOP-8 plastic package per
tube or per tape and reel. A Durel D365A Designer’s Kit (1DDD365AA-K01) provides a vehicle for evaluating and
identifying the optimum component values for any particular application using D365A. Durel engineers also provide
full support to customers, including specialized circuit optimization and application retrofits.
F
I
H
D
C
G
E
A
B
MSOP-8
Min.
Typical
mm.
in.
mm.
in.
A
0.94 0.037
B
0.05 0.002
C
0.20 0.008
D
0.41 0.016
E
0.13 0.005
F
2.84 0.112
G
0.43 0.017
H
4.70 0.185
I
2.84 0.112
1.02
0.040
0.10
0.004
0.33
0.013
0.53
0.021
0.18
0.007
3.00
0.118
0.65
0.026
4.90
0.193
3.00
0.118
Max.
mm.
in.
1.09 0.043
0.15 0.006
0.46 0.018
0.65 0.026
0.23 0.009
3.15 0.124
0.83 0.033
5.11 0.201
3.25 0.128
MSOPs are marked with part number (365A) and 3-digit wafter lot
code. Bottom of marking is on the Pin 1 side.
MSOPs in Tubes: 1DDD365AA-M01
Tube-length = 320 mm (12.6 in). 100 units per
tube.
MSOPs in Tape & Reel: 1DDD365AA-M02
Embossed tape on 360 mm diameter reel per E1A-481-2.
2500 units per reel. Quantity marked on reel label.
Tape Orientation
ISO 9001 Certified
DUREL Corporation
2225 W. Chandler Blvd.
Chandler, AZ 85224-6155
Tel: (480) 917-6000
FAX: (480) 917-6049
Website: http://www.durel.com
The DUREL name and logo are registered trademarks of DUREL CORPORATION.
This information is not intended to and does not create any warranties, express or implied, including any warranty of merchantability
or fitness for a particular purpose. The relative merits of materials for a specific application should be determined by your evaluation.
The EL driver circuits herein are covered by one or more of the following U.S. patents: #5,313,141; #5,347,198; #5,789,870.; #5,780,975; #6,043,610.
Corresponding foreign patents are issued and pending.
© 2000, 2001 Durel Corporation
12
Printed in U.S.A.
LIT-I 9035 Rev. A04