BCP75W Datasheet, PDF (12/12 Pages) List of Unclassifed Manufacturers – 5V and 3.3V, "Half-Brick" 75 Watt, DC/DC Converters

XCP Series
75W, DUAL OUTPUT, MIXED-VOLTAGE DC/DC CONVERTERS
D24 Model
Typical Performance Curves
D48 Model
Output Ripple and Noise (PARD) vs. Input Voltage
(One output @ 15A, other output @ 0A,
PARD measured on loaded output, 20MHz bandwidth.)
70
60
50
PARD 5V Output
40
PARD 3.3V Output
Ripple 3.3V Output
30
Ripple 5V Output
20
10
18
20.57 23.14 25.71 28.29 30.86 33.43
36
Input Voltage (Volts)
Output Ripple and Noise (PARD) vs. Input Voltage
(One output @ 15A, other output @ 0A,
PARD measured on loaded output, 20MHz bandwidth.)
60
55
50
PARD 3.3V Output
45
40
35
PARD 5V Output
30
Ripple 3.3V Output
25
20
15
Ripple 5V Output
10
35
40.71 46.43 52.14 57.86 63.57 69.29
75
Input Voltage (Volts)
Options and Adaptations
Optional Functions
The BCP 75W DC/DC Dual Half-Bricks offer various electrical and mechani-
cal options. Per the Ordering Guide on page 2, the trailing input voltage
range (D24 or D48) in each part number pertains to the base part number.
Part-number suffixes are added after the "input range," indicating the selec-
tion of standard options. The resulting part number is a "standard product"
and is available to any customer desiring that particular combination of
options, as described below.
Suffix Description
Blank
On/Off Control function with positive polarity on pin 3 and inde-
pendent trim function on either output (5V trim on pin 5 and 3.3V
trim on pin 8). The pin length remains at 0.2 inches (5.08 mm).
N
On/Off Control function with negative polarity on pin 3.
L1
Trim the pin length to 0.110 ±0.010 inches (2.79 ±0.25mm). This
option requires a 100-piece minimum order quantity.
L2
Trim the pin length to 0.145 ±0.010 inches (3.68 ±0.25mm). This
option requires a 100-piece minimum order quantity.
Adaptations
There are various additional configurations available on BCP 75W DC/DC
Dual Half-Bricks. Because designating each of them with a standard
part-number suffix is not always feasable, DATEL assigns a 5-digit "adapta-
tion code" after the part-number suffixes. Once a configuration has been
requested by a customer and created by DATEL, the resulting product is
available to any customer as a "standard" off-the-shelf product. Contact
DATEL directly if you are interested in your own set of options/adaptations.
Our policy for minimum order quantities may apply.
Consequently, the following product is offered for sale:
BCP-5/15-3.3/15-D48-30752
Standard product, 48VIN, 5V/15A and 3.3V/15A Outputs with positive On/Off
logic and modified VOUT Trim functions (pin 5 and 8 positions) to be compat-
ible with Power-One's HBD-series. Adapted low profile packaging of 0.5
inches (12.7 mm) and with trimmed pin length to 0.15 inches (3.8 mm).
®
®
A SUBSIDIARY OF C&D TECHNOLOGIES
DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151
Tel: [phone] [phone] Fax: [phone]
www.datel.com
Email: [e-mail]
www.cdpowerelectronics.com
ISO 9001 REGISTERED
DS-0449
1/05
DATEL (UK) LTD. Tadley, England Tel: [phone]
Internet: www.datel-europe.com E-mail: [e-mail]
DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: [phone]
Internet: www.datel-europe.com E-mail: [e-mail]
DATEL GmbH München, Germany Tel: [phone]
Internet: www.datel-europe.com E-mail: [e-mail]
DATEL KK Tokyo, Japan Tel: [phone], Osaka Tel: [phone]
Internet: www.datel.co.jp Email: [e-mail], [e-mail]
DATEL China Shanghai, China Tel: [phone]
E-mail: [e-mail]
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein
do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
12