MLX90110 Datasheet, PDF (10/10 Pages) List of Unclassifed Manufacturers – 128bit OTP/RW Transponder

Unique Features
• Flexible configuration.
• Simple fast programming.
• State of the art reading distance.
• Ideal for flexible stock management of RO
devices, Animal ID, ...
• Designed to be used in ISO Smart cards,
without need for costly tag modules.
Cross Reference
This product can replace any AM modulating
OTP transponder in the 120kHz range. It
extends the flexibility of a RO transponder, and
offers the cheapest solution for a Read Write
transponder, which needs to be programmed
only once.
Absolute Maximum Ratings
Maximum Power Supply (VDDmax)
Maximum current forced between coil and
ground pin (Icoilmax)
Operating Frequency (Freq)
Normal Operating Temperature (Toper)
Maximum Storage Temperature in SO8
(Tstore)
Electrostatic discharge (HBM) on coil pin
(Vesdcoil)
Electrostatic discharge (HBM) on other pins
(Vesd)
Maximum storage light flux (EEPROM erase)
Maximum operating light flux
-0.7 to 7V
+ / - 30mA
60 to 150kHz
-40 to 85°C
-55 to 125°C
500V
1500V
ESD Precautions
Electronic semiconductor products are sensitive
to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control
procedures whenever handling semiconductor
products.
Disclaimer
Melexis reserves the right to periodically make
modifications to product specifications. The
information included herein is believed to be
accurate and reliable. However, Melexis
assumes no responsibility for its use, nor for any
infringements of patents or other rights of third
parties which may result from its use.
MLX90110
128bit OTP/RW Transponder
Pinout
Pin Name
Function
1
COIL
Coil connection 1
4,5,8 VSS
Coil connection 2 / ground connection
Other pins are not connected..
COIL 1
NC 2
NC 3
VSS 4
8 VSS
7 NC
6 NC
5 VSS
Chip dimensions
Total area = 2.45mm².
200um 315um 200um
1470um +/- 15um
Bump High : 25um +/- 5um
IC Thickness :
280um +/- 25um
MLX90110 128bit MTP Transponder
Page 10 of 10
Rev 1.14 1-Dec-2000