|
MLX10803 Datasheet, PDF (10/25 Pages) List of Unclassifed Manufacturers – High power LED driver | |||
|
◁ |
IC specification MLX10803
High power LED driver
ROSC related parameters3
Output voltage
vrosc
vs=13.8V
1
1.5
V
Resistance on pin to GND Roscmin
for 0.5MHz
440
kâ¦
Resistance on pin to GND Roscmid
for 1MHz
220
kâ¦
Resistance on pin to GND Roscmax
for 5MHz
40
kâ¦
Resistance on pin to GND Roscext
for extended min
1200
kâ¦
oscillator frequency
foscext
Monoflop related parameters
Minimum OFF time due to toffmin1mhz
Oscillator is set to
9
µs
the implemented jitter
1 MHz, in case the
oscillator is put to
an other
frequency,
toffmin1mhz
scales accordingly
Maximum OFF time due toffmax1mhz Oscillator is set to
16
µs
to the implemented jitter
1 MHz, in case the
osc is put to an
other frequency,
toffmax1mhz
scales accordingly
Average monoflop time ton1mhz
Oscillator is set to
60.5
µs
for ON state of transistor
1 MHz
1 Circuit operation with external resistor Rosc > 1200k⦠is not recommended
2 Guaranteed by design
3 Value for the resistor Rosc to be connected to ROSC pin is derived from the needed monoflop time Tmon
according to the following expression: Rosc[kâ¦] = 222.2 â
(Tmon[µs] â 0.02)
12.5
3901010803
Rev 025
Page 10/25
Data Sheet
2/OCT/07
|
▷ |