HBT2X3N Datasheet, PDF (10/13 Pages) List of Unclassifed Manufacturers – Bluetooth Module

DATASHEET
HBT2X3N
3 Terminal Description
3.1 Debug Pin
Five signals are used to implement the Debug function. 2, 3, 7, 8, 26Pin need to
use. For example Firmware download, setting of Pin function and RF Function
test(RF Smart Studio program).
3.2 Application Software
3.2.1 Introduction
1. BLE SPP is not a standard SPP, so an Allication should define Service UUID, BLE
Atribute for SPP Rx and Tx data, and sub-procedures to handle characteristic values.
2. These definitions are not fixed, so whenever needs they can be changed.
3.2.2 Attribute Definitions
Attribute
Primary Service UUID
SPP READ UUID
SPP READ Properties
SPP READ Characteristic User Description
Primary Service UUID
PWM1 UUID
PWM1 Properties
PWM1 Characteristic User Description
PWM2 UUID
PWM2 Properties
PWM2 Characteristic User Description
PIO_1 UUID
PIO_1 Properties
PIO_1 Characteristic User Description
PIO_2 UUID
PIO_2 Properties
PIO_2 Characteristic User Description
Value
0xFFA0
0xFFF1
NOTIFY and READ
“BLE Data Write”
0xFF10
0xFF11
READ and WRITE
“PWM CH0 duty ratio”
0xFF12
READ and WRITE
“PWM CH1 duty ratio”
0xFF13
READ and WRITE
“PIO_1_1”
0xFF14
READ and WRITE
“PIO_1_2”
www.chipsen.com
10 page / 13 pages