X1008PS Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Inductors for xDSL Filters

Document 240-1
1008PS Inductors for xDSL Filters
Coilcraft’s new 1008PS Series is ideal for use in a variety of
filters, including the data separation filters used in VDSL and
ISDN/ADSL implementations.
They measure just 2.74 mm high and have very low DC
resistance to reduce insertion loss. The specially designed
ferrite cover provides magnetic shielding and the best
possible surface for pick and place handling.
Coilcraft offers reference designs for various xDSL filters
using these and other surface mount components. We can
also provide several complete low pass and band pass filter
modules in space-saving SIP configurations.
Coilcraft Designer’s Kit C141 contains six samples each of
the standard parts shown. To order, contact Coilcraft or visit
http://order.coilcraft.com.
Part
1_number1
1008PS-102K_
1008PS-152K_
1008PS-182K_
1008PS-272K_
1008PS-392K_
1008PS-472K_
1008PS-562K_
1008PS-682K_
1008PS-103K_
1008PS-153K_
1008PS-223K_
1008PS-333K_
1008PS-393K_
1008PS-473K_
1008PS-683K_
1008PS-823K_
1008PS-104K_
1008PS-124K_
1008PS-154K_
1008PS-224K_
1008PS-334K_
1008PS-474K_
1008PS-564K_
1008PS-684K_
1008PS-824K_
1008PS-105K_
DCR⁴
L ±10%² Q min³ max
(µH) @ 1 MHz (Ohms)
1.0 35
1.5 35
1.8 35
2.7 38
3.9 38
0.05
0.06
0.09
0.14
0.26
4.7 38
5.6 38
6.8 38
10
38
15
38
0.35
0.36
0.58
0.92
1.15
22
40
1.40
33
45
1.61
39
45
1.85
47
45
2.5
68
45
3.8
82
45
4.3
100
45
5.8
120
50
6.3
150
50
7.5
220
55 10.0
330
55 11.5
470
55 16.3
560
55 18.1
680
55 24.0
820
45 26.0
1000
45 29.0
SRF⁵
typ
(MHz)
344
260
225
185
175
160
150
120
105
35
26
20
16
19
12
9.0
7.0
7.0
5.8
10.0
3.8
3.1
2.8
2.5
1.5
2.0
Isat⁶ Irms⁷
(A) (A)
3.0 2.00
2.8 2.00
2.1 1.90
1.3 1.60
1.2 1.20
1.0
1.0
0.84
0.78
0.70
1.10
0.90
0.80
0.72
0.60
0.65
0.51
0.45
0.40
0.31
0.55
0.50
0.47
0.42
0.32
0.30 0.30
0.30 0.30
0.25 0.28
0.22 0.26
0.22 0.21
0.20 0.19
0.16 0.18
0.13 0.15
0.12 0.14
0.10 0.12
0.10 0.11
1. Specify packaging code:
1008PS-105KC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
(750 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (2500 parts per full reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, using Coilcraft SMD-A fixture in
Agilent/HP 4263B impedance analyzer.
3. Q measured on Agilent/HP 4291 with Agilent/HP 16193 test fixture.
4. DCR measured on micro-ohmmeter and Coilcraft CCF840 test fixture.
5. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value without
current.
7. Average current for a 40°C rise above 25°C ambient.
8. Operating temperature range −40°C to +85°C.
9. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Specifications subject to change without notice. Document 240-1 Revised 03/27/03