WT7511 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – protection circuits, power good output (PGO), fault protection latch (FPL_N) and a protection detector function (PDON_N) control

`
WT7511
GENERAL DESCRIPTION
The WT7511 provides protection circuits, power good output (PGO), fault protection latch (FPL_N),
and a protection detector function (PDON_N) control. It can minimize external components of switching
power supply systems in personal computer.
The Over Voltage Detector (OVD) monitors 3.3V, 5V, 12V input voltage level. When OVD detect the
fault voltage level, the FPL_N is latched HIGH and PGO go low. The latch can be reset by PDON_N goo
HIGH. There is 2.4 ms delay time for PDON_N turn off FPL_N.
When OVD and UVD detect the right voltage level, the power good output (PGO) will be issue.
FEATURES
• The Over Voltage Detector (OVD) monitors 3.3V, 5V, 12V input voltage level.
• Both of the power good output (PGO) and fault protection latch (FPL_N) are Open Drain Output.
• 300 ms time delay for PGO.
• 38 ms for PDON_N input signal De–bounce.
• 73 us for internal signal De–glitches.
• 2.4 ms time delay for PDON_N turn-off FPL_N.
PIN ASSIGNMENT AND PACKAGE TYPE
PGI 1
GND ₂
FPL_N ₃
PDON_N ₄
8
PGO
Package type
ORDERING INFORMATION
7
VCC
6
V5
8–Pin Plastic DIP WT7511–N080WT–12
8–Pin Plastic SOIC WT7511–S080WT–12
5
V33
PIN DESCRIPTION
Pin No. Pin Name TYPE
Description
1 PGI
I power good input pin
2 GND
P Ground
3 FPL_N
O fault protection latch output pin(open drain output)
4 PDON_N I protection detector function ON/OFF control input pin
5 V33
I 3.3V input pin
6 V5
I 5V input pin
7 VCC
I Supply voltage / 12V input pin
8 PGO
O power good output pin(open drain output)