USC-DIN Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – Digital Panel Meters Modular signal conditioner

Digital Panel Meters
Modular signal conditioner
Type USC-DIN
• Linearization of V and A inputs up to 16 points
• Multi-input modular signal’s conditioner
• 0.1% RDG basic accuracy
• TRMS AC current and voltage measurements
• AC/DC current measurements; selectable full scales
(200µA to 5A)
• AC/DC voltage measurements; selectable full scales
(200mV to 500V)
• °C or °F temperature measurements
(Pt100-250-500-1000, Ni100, TC J-K-S-T-E)
• Resistance measurements; selectable full scales
(20Ω to 20kΩ)
• Up to 4 independent alarm set-points (optional)
• 20mA/10VDC analog output (optional)
• Serial port RS485 or RS232 (optional)
• MODBUS, JBUS communication protocol
• Front protection degree: IP 20
Product Description
How to order USC XXX XX XX XX X XX
µp-based signal’s condition-
er, for current, voltage, tem-
perature and resistance
measurements. Measuring
ranges and functions easily
programmable from the PC
by means of optional Usc-
Soft software available on
request. UscSoft includes
programming, display and
min-max functions. Condi-
tioner’s housing for DIN-
RAIL mounting with front
protection degree: IP 20. All
displaying and programming
data are referred to UscSoft.
Model
Slot A
Slot B
Slot C
Slot D
Slot E
Options
How to order
UscSoft-kit
UscSoft-kit: software plus “UCOM1” communication cable for
programming USC by means of PC.
Type Selection
Slot A (measuring inputs)
Slot B (communication)
LSX:
LSE/
LSF:
HSX:
TRX:
single channel input:
0.2-2-20mA DC/AC,
0.2-2-20V DC/AC
single + AUX input :
0.2-2-20mA DC/AC;
0.2-2-20V DC/AC
single channel input:
0.2-2-5A DC/AC;
20-200-500V DC/AC
signal input: TC tem-
perature probes: J-K-S-
T-E, Pt100-250-500-
1000 and resistance
0.02-0.2-2-20kΩ
XX: None
SX: Serial port RS485
SY: Serial port RS232
Options
XX: None
TX: Tropicalization
Slot C (communication and alarm) Slot D (communication)
XX: None
R1: Single relay output,
(AC1-8AAC, 250VAC)
R2: Dual relay output,
(AC1-8AAC, 250VAC)
R4: Dual relay output,
(AC1-8AAC, 250VAC) +
dual open collector out-
put (NPN, 100mA)
R5: 4 Relay outputs (AC1-
5AAC, 250VAC)
AV(*): Single analogue out-
put:
0 to 20mA DC and
0 to 10V DC
XX: None
AV(*): Single analogue out-
put,
0 to 20mA DC and
0 to 10V DC
(*): The two analogue
outputs cannot be
used at the same
time. It is possible to
plug in only one
module by signal
conditioner.
Slot E (power supply)
H: 90 to 260V AC/DC
L: 18 to 60V AC/DC
Specifications are subject to change without notice USCDS040706
1