UDT-455 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Amplifier Hybrids

Photops™
Photodiode-Amplifier Hybrids
The Photop™ Series, combines a photodiode with an operational
amplifier in the same package. Photops™ general-purpose detectors
have a spectral range from either 350 nm to 1100 nm or 200 nm to
1100nm. They have an integrated package ensuring low noise output
under a variety of operating conditions. These op-amps are specifically
selected by UDT Sensors engineers for compatibility to our photodiodes.
Among many of these specific parameters are low noise, low drift and
capability of supporting a variety of gains and bandwidths determined by
the external feedback components. Operation from DC level to several
MHz is possible in an either unbiased configuration for low speed, low
drift applications or biased for faster response time. LN-Series Photops™
are to be used with OV-bias.
Any modification of the above devices is possible. The modifications
can be simply adding a bandpass optical filter, integration of additional
chip (hybrid) components inside the same package, utilizing a different
op-amp, photodetector replacement, modified package design and / or
mount on PCB or ceramic. For your specific requirements, contact one
of our Applications Engineers.
" _APPLICATIONS
• General Purpose Light
Detection
• Laser Power Monitoring
• Medical Analysis
• Laser Communications
• Bar Code Readers
• Industrial Control Sensors
• Pollution Monitoring
• Guidance Systems
• Colorimeter
" _FEATURES
• Detector/Amplifier
Combined
• Adjustable Gain/Bandwidth
• Low Noise
• Wide Bandwidth
• DIP Package
• Large Active Area
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: [phone], Fax: [phone], [e-mail]