SX15U Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 15 Watt,120 VAC Input Fully Enclosed Switchiing Power Supply

SX15U
15 Watt ,120 VAC Input
Fully Enclosed Switching Power Supply
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load
FEATURES
OVERVOLTAGE PROTECTION
OVERCURRENT PROTECTION
HIGHLY RELIABLE
CONVECTION COOLED
ON/OFF LED LIGHT
ADJUSTABLE OUTPUTS
3 YEAR CONTINUOUS USE WARRANTY
SAFETIES / EMI
FCC-B
CISPR-B
VCCI-2
INPUT SPECIFICATIONS
Input Voltage.................................................. 85-132 VAC
Input Frequency............................................. 50/60 Hz (47-63 Hz)
Input Current.................................................. 0.3A (typ)
Inrush Current............................................... 10A (typ)
OUTPUT SPECIFICATIONS
Output Voltage............................................... See chart
Output Adjustment......................................... ±10%
Efficiency........................................................ 73-78%
Over-Voltage Protection................................. Zener limiter
Over-Current Protection................................ Over 105% (Automatic Recovery)
Ripple and Noise........................................... 100-200 mVp-p
Hold-Up Time................................................. 20 ms
Line/Load Regulation..................................... See Chart
Rise Time....................................................... 100 ms max.
(at 25°C nominal output/input)
Leakage Current............................................ 0.5 mA max.
GENERAL SPECIFICATIONS
MTBF............................................................. > 360,000 Hours
Isolation Voltage
Primary to Secondary.....................AC 2000V
Primary to Case..............................AC 2000V
Secondary to Case.........................AC 500V
Isolation Resistance...................................... Input-Output-
case 100 M-Ohms min.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature .............................. 0˚C ~ +60˚C
Derates linearly 2.5%/˚C after 50˚C
Cooling............................................ Convection
Temperature Coefficient.................. 0.02%/°C
Humidity.......................................... 20-85% RH (non-condensing)
Storage Temperature...................... -20°C ~ +85°C
Shock/Vibration............................... 20G (3 Directions)
PHYSICAL SPECIFICATIONS
Metal Enclosed - Terminal Block
44