SPN150 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 150 WATT, Uniiverrsall IInputt Fulllly Encllosed Swiittchiing Powerr Supplly

SPN150
150 WATT , Universal Input
Fully Enclosed Switching Power Supply
ELECTRICAL SPECIFICATIONS
All specifications are typical at nominal input, full load.
INPUT SPECIFICATIONS
Input Voltage.............................................. AC 85-264V
Input Frequency.......................................... 47 ~ 63 Hz
Input Current.............................................. 1.00 ~ 1.3A Typ
Inrush Current (100/230VAC cold start) .................13A ~ 31 Typ
Power Factor .............................................. .99
FEATURES
REMOTE SENSE
POWER FACTOR CORRECTED
UNIVERSAL INPUT (AC85-264V)
OVERVOLTAGE PROTECTION
OVERCURRENT PROTECTION
LIGHTWEIGHT CONSTRUCTION
METAL CHASSIS WITH COVER
COMPACT, LOW-PROFILE PACKAGES
3 YEAR WARRANTY
OUTPUT SPECIFICATIONS
Output Voltage........................................... See Chart
Output Adjustment.................................... ± 10%
Efficiency.................................................... 78 ~ 87%
Over-Voltage Protection.............................. 115 - 150% Manual Reset
Over-Current Protection.............................. Automatic Recovery (105% min)
Ripple and Noise........................................ 100 mVp-p max.
Hold-Up Time............................................. 50 mS
Line/Load Regulation.................................. See Chart
Rise Time.................................................... 470 - 1600 mS
Leakage Current (100/230VAC)........................ Vin= 100V
0.5mA max.
Vin= 230V
0.75mA max.
GENERAL SPECIFICATIONS
MTBF ......................................................... >120,000 Hours
Isolation Voltage
Primary to Secondary............... 3000VAC
Primary to Case........................ 1500VAC.
Secondary to Case.................... 500VAC.
Isolation Resistance.................................... 100 M-Ohms min.
SAFETIES / EMI
FCC-B
EN 55022-B
VCCI-II
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature .............................. 0˚C~+60˚C Derates Linearly 2.5%/˚C After 50˚C
Cooling........................................................ Convection
Temperature Coefficient.............................. 0.02% / ˚C
Humidity.......................................................20-85% Rh (non-condensing)
Storage Temperature.................................. -20˚C ~ +85˚C
Shock Vibration.......................................... Shock: 20G (3 directions each 3 times)
Vibration: 10 ~ 55Hz
PHYSICAL SPECIFICATIONS
Metal Enclosed Power Supply with Terminal Strip
74