English
Language : 

SMD2920 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Surface Mount PTC Devices
TM
SMD2920 Surface Mount PTC Devices R.O.C. Patent#415624
l The SMD2920 Series, a polymer-based Positive Temperature Coefficient (PTC) device to
protect electrical circuits against overcurrent conditions with resettable feature, is fully
compatible with current industrial standards.
l The new designed SMD2920 Series provides surface mount overcurrent protection with
superior performance.
l Application: The SMD2920 Series is ideal for computers and peripherals and can be applied to
almost anywhere there is a low voltage power supply and a load to be protected.
l The solder plated termination is designed to meet or exceed solderability specifications and
provide excellent solder joint inspectability.
l Agency Approval: UL File # E201431.
CSA File # CA115375-1
ELECTRICAL CHARACTERISTICS
Part Number
SMD2920P030TS
SMD2920P050TS
Maximum
Time To Trip
Resistance
Agency
I hold Itrip Vmax I max Pd max. Current Time R min R 1max Approval
(A) (A) (Vdc) (A) (W) (A) (Sec.) ( ) ( )
0.30 0.60 60 10 1.5 1.50 3.00 1.200 4.800 UL CSA TÜV
0.50 1.00 60 10 1.5 2.50 4.00 0.350 1.400 UL CSA TÜV
SMD2920P075TS 0.75 1.50 30 40 1.5 8.00 0.30 0.350 1.000 UL CSA TÜV
SMD2920P100TS 1.10 2.20 33 40 1.5 8.00 0.50 0.120 0.410 UL CSA TÜV
SMD2920P125TS 1.25 2.50 15 40 1.5 8.00 2.00 0.070 0.250 UL CSA TÜV
SMD2920P150TS 1.50 3.00 33 40 1.5 8.00 2.00 0.080 0.230 UL CSA TÜV
SMD2920P185TS 1.85 3.70 33 40 1.5 8.00 2.50 0.065 0.150 UL CSA TÜV
SMD2920P200TS 2.00 4.00 15 40 1.5 8.00 5.00 0.050 0.125 UL CSA TÜV
SMD2920P200TS/24 2.00 4.00 24 40 1.5 8.00 5.00 0.050 0.125 UL CSA TÜV
SMD2920P250TS 2.50 5.00 15 40 1.5 8.00 10.00 0.035 0.085 UL CSA TÜV
SMD2920P260TS 2.60 5.20 6 40 1.5 8.00 10.00 0.025 0.075 UL CSA TÜV
SMD2920P300TS 3.00 6.00 6 40 1.5 8.00 20.00 0.015 0.048 UL CSA TÜV
SMD2920P300TS/15 3.00 6.00 15 40 1.5 8.00 20.00 0.015 0.048 UL CSA TÜV
Note: I hold = Hold current: maximum current device will pass without tripping in 20 still air.
I trip = Trip current: minimum current at which the device will trip in 20 still air.
Vmax = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
Pd = Power dissipated from device when in the tripped state at 20 still air.
R min= Minimum resistance of device in initial (un-soldered) state.
R 1max= Maximum resistance of device at 20 measured one hour after tripping or reflow soldering of 260 for 20 sec.
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
Specifications are subject to change without notice.
107