SM02B-BHTS-B-TB Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Disconnectable Crimp style connectors

Crimp
5.1mm
(.201") pitch
BHT CONNECTOR
Disconnectable Crimp style connectors
Emboss Tape
Features ––––––––––––––––––––––––
• High withstanding voltage
Conforming to IEC664-1 standards, the BHT connector is
designed to have a enough electrical creep distances at the
high-voltage side. Thus, compared to the conventional power
supply connector for liquid crystal display backlight lamps,
higher voltage is guaranteed.
• Low profile
Only 2.8mm (.118") height.
• Housing construction
Housing is of 2-piece construction, to prevent the contact for
the higher voltage side from being exposed, while the lower
voltage side is designed to be shorter for easy insertion of the
contact even with thin wires.
Low profile connectors with high
withstanding voltage, designed for
connecting liquid crystal display backlight
lamps to their starters.
H _JST
164
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC
• Voltage rating: 1,500V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 4,000V AC/minute
• Applicable wire: AWG #28 to #24
Insulation O.D/0.9 to 1.7mm(.035" to .067")
* Contact JST for details.
Standards ––––––––––––––––––––––
0^{Recognized E60389}
1^{Certified LR20812}