SG-800H.1 Datasheet, PDF (1/12 Pages) List of Unclassifed Manufacturers – SURFCOIL SMT INDUCTORS

ENGINEERING BULLETIN
Sprague-Goodman SG-800H.1
Supercedes SG-800G
SURFCOIL^® SMT INDUCTORS
FEATURES
• Lead free, ROHS Compliant
• High Q
• High self-resonant frequency including
nonmagnetic models in microwave range
• Shielded series use ferrite filled encapsulation
to reduce external magnetic coupling
• Low DC resistance
• Carrier and reel packaging is standard
• Ten case sizes
SPECIFICATIONS
Electrical
• Inductance & Q, etc.: See tables
• Temperature range –20°C to +85°C,
except GLY, GLYC, GLZ, GLZB and GLZP
Models are – 40°C to +85°C
- Change of L = ±10% max, except
GLX, GLY, GLYC, GLZ, GLZB and GLZP
Models are ± 5%
- Change of Q = ±20% max, except GLY, GLYC,
GLZ, GLZB and GLZP Models are ±25%
• Rated Current: See tables. Current
rating is determined by either or both
of the following conditions:
1. Self heating raises SURFCOIL
temperature 20°C
2. Inductance value reduced by
10% from saturation effect
Mechanical (Chip Inductors)
• Suitable for wave flow soldering, infrared,
and vapor phase reflow (typically over 90%
coverage)
• Withstands soldering temperatures
without damage
• Fully encapsulated and thermally cycled
for stability and highest reliability
Encapsulation: Epoxy resin all series;
GLC, GLD and GLW have ferrite
filler for closed magnetic circuit.
Core: Ferrite (except high
frequency GLA and
GLU series, which
are nonmagnetic)
Coil: Polyurethane
enameled copper wire
Terminal: Phosphor-Bronze
tin plated
[View applies to molded bobbin wound types]
Sprague-Goodman Electronics, Inc.
1700 SHAMES DRIVE, WESTBURY, NY 11590
TEL: [phone] • FAX: [phone]
E-MAIL: [e-mail]