SENACC-010 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Acceleration Sensor - SENACC

• Single axis acceleration measurements (low-
frequency vibrations and movements).
• Wide acceleration range.
• Excellent EMI/RFI immunity.
• Rugged epoxy-filled enclosure, small size.
• Watertight mini sure-seal^® connector.
The SENACC measures vibrations up to 150Hz
with a recorder that is setup accordingly. It may
also measures longitudinal, lateral or vertical
acceleration of the body or the moving parts of a
vehicle.
When its sensing axis is oriented to gravity the
SENACC experiences an acceleration of +1.0 g.
• Available ranges:
Sensor
SENACC-010
SENACC-030
SENACC-050
SENACC-011
SENACC-250
SENACC-051
Range
± 1.0G
± 3.3G
± 5.0G
± 10.0G
± 25.0G
± 50.0G
• Operating temperature: -40°C to 85°C.
• Power supply: 5 mA, 11-24Vdc.
• Dimensions: 33mm x 38mm.
• Weight: 56 grams (1.975 oz.)
• Align the sensor‘s sensitivity axis with the
measuring direction.
• Use the #4-40 screw-holes to fasten the sensor
rigidly to the moving body.
• Connect the sensor to an analog input of the
system: A, B or C.
• Carefully align indexing rib when mating mini
sure-seal^® connectors.
Technical Data Sheet
Acceleration Sensor - SENACC
• Do not expose wire/connector to water, oil or
fuel.
• Route the sensor cable away from sources of
interference, such as ignition coils, plug leads,
electronic modules or antennas.
• Verify that the cable is not pinched or
stretched by moving parts.
• Do not bend cable with curvature radius
smaller than 1.60″ [40 mm].
SENACCTDS/E - ISSUE 4 – October 2004
PAGE 1 of 3