SDV2415 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 1.5 Amp 120/240Vac 16 PIN DIP Package

Series SDV, SDI
1.5 Amp • 120/240Vac • 16 PIN DIP Package
• Compact for High
Density PCB M ount
• DC Control
• SCR Output
The Series SDV and SDI solid state relays
are rated at 1.5 Amps RMS at ambient
temperatures up to 40ûC. The compact
16 pin DIP package is perfect for high
density printed circuit boards. The SDV
is voltage operated, and the SDI is cur-
rent operated. Both are offered in
either zero voltage or random switch-
ing (R) versions.
Manufactured in Crydom's ISO 9002
Certified facility for optimum product
performance and reliability.
CURRENT DERATING CURVE
M O D E L N O . SDV2415 SDV2415R
INPUT SPECIFICATIONS ➀
Control Voltage Range
3.5-10 Vdc 3.5-10 Vdc
SDI2415 SDI2415R
------
1.5
Control Current Range
------
10-35 mA 10-35 mA
Nominal Input Impedance
270 Ohm 270 Ohm
------
1.0
Typical Input Current @ 5 Vdc
15 mAdc 15 mAdc
------
Must Turn On Voltage
3.5 Vdc 3.5 Vdc
------
0.5
Must Turn On Current
------
10 mA 10 mA
Must Turn Off Voltage
1.0 Vdc 1.0 Vdc
------
20
40
60
80
AMBIENT TEMPERATURE (˚C)
Max. Load Current vs. Temp.
Must Turn Off Current
OUTPUT SPECIFICATIONS ➀
Operating Voltage Range (47-63 Hz)
------
1 mA
1 mA
12-280 Vrms
16
+
INPUT
--
1
10
AC
OUTPUT
AC
8
PIN 8: AC LOAD
PIN 10:AC LOAD
PIN 16:+DC CONTROL
PIN 1: -DC CONTROL
Load Current Range
Transient Over-Voltage
Max. Surge Current, (16.6ms)
Min. Off-State dv/dt @ Max. Rated Voltage ➂
Max.Off-State Leakage @ Rated Voltage
.025 - 1.5 Arms
600 Vpk
30 Apk
500 V/µsec
.01 mArms
.19
(4.8)
.850
(21.6)
.265
Max. On-State Voltage Drop @ Rated Current
1.2 Vpk
(6.7)
Max.Turn-On Time
1/2 cycle 0.1 msec
1/2 cycle 0.1 msec
Max. Turn-Off TIme
1/2 cycle
.025
(.6) _.125
(3.2)
16
.70
(17.8)
.60
(15.2)
10
Power Factor (Min.) WIth Max. Load
.300
GENERAL SPECIFICATIONS
(7.6)
Dielectric Strength ➁
Insulation Resistance (Min.) @ 500 Vdc ➁
0.5
3750 Vrms
10⁹ Ohm
Max. Capacitance, Input-Output
2.0 pF
1
8
Ambient Operating Temperature Range
Ambient Storage Temperature Range
-30 to 80˚C
-30 to 125˚C
All dimensions are in inches (millimeters)
M ECHANICAL SPECIFICATIONS
Weight: (typical)
.10 oz. (2.9 g)
GENERAL NOTES
➀ All parameters at 25¼C unless otherwise specified.
Encapsulation:
➁ Dielectric and insulation resistance are measured
between input and output.
➂ Off-State dv/dt test method per EIA/NARM standard RS-443.
Thermally Conductive Epoxy
©2002 CRYDOM CORP, Specifications subject to change without notice.
APPROVALS
UL 116950
CSA LR81689
FastFax Document No.102
SERIES SDV, SDI.
Rev. 042302
PAGE 1 OF 1
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]