English
Language : 

SD197-70-74-661 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Cooled Large Area 10mm Red Silicon APD Module
SD 197-70-74-661
Cooled Large Area 10mm Red Silicon APD Module
PACKAGE DIMENSIONS INCH [mm]
FEATURES
• Low noise
• Small size
• High sensitivity
DESCRIPTION
The SD 197-70-72-661 module Incorporates a 10mm
cooled APD, TEC controller, HV supply, and two
stage preamplifier, in a small package
APPLICATIONS
• Industrial
• Medical
ABSOLUTE MAXIMUM RATING* (TA)= 23°C UNLESS OTHERWISE NOTED
ELECTRIC WIRING TABLE
SYMBOL PARAMETER
MIN MAX UNITS WIRE COLOR
ITEM
+/- 12 VS
+5 VS
TSTG
TO
Voltage Supplies
Storage Temperature
Operating Temperature
+/-11 +/-13
V
+4.75 +5.25
-40 +70
°C
0
+40
°C
*All specifications apply when APD is at 0°C with a gain of 300 and a load resistance of 50 ohms.
Typical HV divider Ratio and voltage gain is 404.
Recommended load on amplifier output is from 50ohms to 1Mohm.
Devices must be mounted to a heat sink with TEC on.
**To activate the external bias control (blue wire), turn the gain adjust fully counter clockwise and
place a jumper across J1 the external bias select connector. Input voltage on blue wire 0 to 5 volts.
The module must be operated with a heat sink.
Red
Green
Black
Blue**
Orange
Violet
Gray
Yellow
White
+12V
GND
-12V
External Bias Adjust Input
HV Monitor
Temperature Monitor
Temperature Monitor GND
+5V
GND for +5V Supply
*ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
Is
Vos
lrange
S
NEP
Ro
fcut
CHARACTERISTIC
Current Supply
Output Offset
Spectral Application Range
Sensitivity
Noise Equivalent Power
Output resistance
High Cutoff Frequency
TEST CONDITIONS
+12V supply
-12V supply
+5V supply
Spot Scan
f = 1MHz, l= 500nm
f = 1MHz, l= 500nm
l= 675 nm
MIN
120
30
0.8
350
11
TYP
±1
4.8
7 x10-15
50
14
MAX
220
50
1.9
±5
1050
UNITS
mA
mV
nm
105V/W
W/ √ Hz
ohms
MHz
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, info@lasercomponents.co.uk