SCXL004DN Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Precision Compensated, Low Pressure Sensors

SCXL004DN
Precision Compensated, Low Pressure Sensors
FEATURES
• 0 - 4 In. H O
2
• Very Low Pressure
Resolution
• Precision Temperature
Compensation
• Low Noise
• Calibrated Zero and Span
• High Impedance for
Low Power Applications
GENERAL DESCRIPTION
The SCXL series sensors provide a
very cost effective solution for pressure
applications that require high accuracy over
very low operating pressure ranges.
These internally calibrated and
temperature compensated sensors were
specifically designed to provide an accurate
and stable output over a 0°C to 50°C
temperature range.
This series is intended for use with non-
corrosive, non-ionic working fluids such
as air and dry gases.
The output of the bridge is ratiometric to
the supply voltage and operation from any
D.C. supply voltage up to +18V is
acceptable.
Scale:
APPLICATIONS
• Air Flow
• Respirators
• HVAC
EQUIVALENT CIRCUIT
ELECTRICAL CONNECTIONS
1cm
½ inch
Bottom View
Pin 1. Temperature Output (+)
Pin 2. V
S
Pin 3. Output (+)
Pin 4. Ground
Pin 5. Output (-)
Pin 6. Temperature Output (-)
Note: The polarity indicated is for
pressure applied to port B
January 1998/043
Tope Co., Ltd.
Phone: [phone], Fax: [phone]
e-mail: [e-mail], http://www.sensor.com.tw