S6B-ZR-SM4A Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 1.5mm pitch/Disconnectable Crimp style connectors

ZH CONNECTOR
Emboss Tape
1.5mm pitch/Disconnectable Crimp style connectors
The ZH connector is very small with a
mounting height of 5.6mm and a thickness
of only 3.5mm. Contact retention lances on
the housing make insertion easier, while the
dimple at the center of the contact ensures
reliable contact with the post.
• Compact, low profile design
• Housing lances
• Reliable contact construction
• Distortion resistant construction
• Compatible with the ZR insulation
displacement connectors
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #26)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/30m Ω max.
• Insulation resistance: 500M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable wire: AWG #32 to #26
• Applicable PC board thickness: 0.6 to 1.2mm,1.6mm
* RoHS compliant products are published.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
2 ^R9351092
PC board layout and Assembly layout
ʪThrough-hole type (viewed from soldering side) ʫ
Top entry type
 ^ʶ
 NJO

Side entry type
 ^ʶ
 NJO

П
 ^ʶ

П
 ^ʶ


Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should
be larger. The dimensions above should serve as a guideline. Contact JST for details.
ʪSMT type (viewed from component side) ʫ
SM2 type
Side entry type
Ê·
/ Ê´

NJO ^ʶ
  ^ʶ

SM4 type
Top entry type
^{ʶ ʶ} ^ʶ
Side entry type
^{ʶ ʶ} ^ʶ
П

Ê´


 NJO
Note: 1. N...Number of circuits
2. Tolerances are non-cumulative: ±0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
16
 NJO