S30 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – Sensors - ac-Voltage

S30 Sensors – ac-Voltage Series
Self-contained ac-operated sensors
Features
• Featuring EZ-BEAM^® technology, the specially designed optics and electronics
provide reliable sensing without the need for adjustments
• 30 mm plastic threaded barrel sensor in opposed, retroreflective or fixed-field
modes
• Completely epoxy-encapsulated to provide superior durability, even in harsh
sensing environments rated to IP69K
• Innovative dual-indicator system takes the guesswork out of sensor performance
monitoring
• 20 to 250V ac (3-wire hookup); SPST solid-state switch output, maximum
load 300 mA
Models
Sensing Mode
Opposed
P
Polarized
Retroreflective
Fixed-Field
Range
60 m (200')
6 m (20')
200 mm (8") cutoff
400 mm (16") cutoff
LED
Infrared
950 nm
Visible Red
680 nm
Infrared
880 nm
Output
–
LO
DO
LO
DO
LO
DO
LO
DO
LO
600 mm (24") cutoff
DO
* S tandard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., S303E W/30).
• 4-pin Micro-style QD models: add suffix “Q1” (e.g., S303EQ1). A model with a QD connector requires a mating cable.
Model*
S303E
S30AW3R
S30RW3R
S30AW3LP
S30RW3LP
S30AW3FF200
S30RW3FF200
S30AW3FF400
S30RW3FF400
S30AW3FF600
S30RW3FF600
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.
Printed in USA
01/05
P/N 121519